TOC |
|
OpenID Connect 1.0 is a simple identity layer on top of the OAuth 2.0 protocol. It allows Clients to verify the identity of the End-User based on the authentication performed by an Authorization Server, as well as to obtain basic profile information about the End-User in an interoperable and REST-like manner.
This specification defines the core OpenID Connect functionality: authentication built on top of OAuth 2.0 and the use of Claims to communicate information about the End-User. It also describes the security and privacy considerations for using OpenID Connect.
1.
Introduction
1.1.
Requirements Notation and Conventions
1.2.
Terminology
1.3.
Overview
2.
Authentication
2.1.
Authentication using the Authorization Code Flow
2.1.1.
Authorization Code Flow Steps
2.1.2.
Authorization Endpoint
2.1.2.1.
Authorization Request
2.1.2.1.1.
Authorization Request Parameters
2.1.2.2.
Authorization Request Validation
2.1.2.3.
Authorization Server Authenticates End-User
2.1.2.4.
Authorization Server Obtains End-User Consent/Authorization
2.1.2.5.
Authorization Response
2.1.2.6.
Authorization Response Validation
2.1.2.7.
Authorization Error Response
2.1.3.
Token Endpoint
2.1.3.1.
Token Request
2.1.3.2.
Token Request Validation
2.1.3.3.
Token Response
2.1.3.4.
Token Response Validation
2.1.3.5.
ID Token
2.1.3.6.
ID Token Validation
2.1.3.7.
Access Token Validation
2.1.3.8.
Token Error Response
2.2.
Authentication using the Implicit Flow
2.2.1.
Implicit Flow Steps
2.2.2.
Authorization Endpoint
2.2.2.1.
Authorization Request
2.2.2.1.1.
Authorization Request Parameters
2.2.2.2.
Authorization Request Validation
2.2.2.3.
Authorization Server Authenticates End-User
2.2.2.4.
Authorization Server Obtains End-User Consent/Authorization
2.2.2.5.
Authorization Response
2.2.2.5.1.
Redirect URI Handling
2.2.2.6.
Authorization Response Validation
2.2.2.7.
Access Token Validation
2.2.2.8.
ID Token
2.2.2.9.
ID Token Validation
2.2.2.10.
Authorization Error Response
2.3.
Authentication using the Hybrid Flow
2.3.1.
Hybrid Flow Steps
2.3.2.
Authorization Endpoint
2.3.2.1.
Authorization Request
2.3.2.1.1.
Authorization Request Parameters
2.3.2.2.
Authorization Request Validation
2.3.2.3.
Authorization Server Authenticates End-User
2.3.2.4.
Authorization Server Obtains End-User Consent/Authorization
2.3.2.5.
Authorization Response
2.3.2.5.1.
Redirect URI Handling
2.3.2.6.
Authorization Response Validation
2.3.2.7.
Access Token Validation
2.3.2.8.
Code Validation
2.3.2.9.
ID Token
2.3.2.10.
ID Token Validation
2.3.2.11.
Authorization Error Response
2.3.3.
Token Endpoint
2.3.3.1.
Token Request
2.3.3.2.
Token Request Validation
2.3.3.3.
Token Response
2.3.3.4.
Token Response Validation
2.3.3.5.
ID Token
2.3.3.6.
ID Token Validation
2.3.3.7.
Access Token
2.3.3.8.
Access Token Validation
2.3.3.9.
Token Error Response
3.
Initiating Login from a Third Party
4.
Claims
4.1.
Requesting Claims using Scope Values
4.2.
Standard Claims
4.2.1.
Address Claim
4.2.2.
Claims Languages and Scripts
4.2.3.
Claim Stability and Uniqueness
4.2.4.
Additional Claims
4.3.
UserInfo Endpoint
4.3.1.
UserInfo Request
4.3.2.
UserInfo Response
4.3.3.
UserInfo Response Validation
4.3.4.
UserInfo Error Response
4.4.
Requesting Claims Locales with the "claims_locales" Request Parameter
4.5.
Requesting Claims using the "claims" Request Parameter
4.5.1.
Individual Claims Requests
4.5.2.
Languages and Scripts for Individual Claims
4.6.
Claim Types
4.6.1.
Normal Claims
4.6.2.
Aggregated and Distributed Claims
4.6.2.1.
Example of Aggregated Claims
4.6.2.2.
Example of Distributed Claims
5.
Passing Request Parameters as JWTs
5.1.
Passing a Request Object by Value
5.1.1.
Request using the "request" Request Parameter
5.2.
Passing a Request Object by Reference
5.2.1.
URL Referencing the Request Object
5.2.2.
Request using the "request_uri" Request Parameter
5.2.3.
Authorization Server Fetches Request Object
5.2.4.
"request_uri" Rationale
5.3.
Validating JWT-Based Requests
5.3.1.
Encrypted Request Object
5.3.2.
Signed Request Object
5.3.3.
Request Parameter Assembly and Validation
6.
Self-Issued OpenID Provider
6.1.
Self-Issued OpenID Provider Discovery
6.2.
Self-Issued OpenID Provider Registration
6.2.1.
Providing Information with the "registration" Request Parameter
6.3.
Self-Issued OpenID Provider Request
6.4.
Self-Issued OpenID Provider Response
6.5.
Self-Issued ID Token Validation
7.
Subject Identifier Types
7.1.
Pairwise Identifier Algorithm
8.
Client Authentication
9.
Signatures and Encryption
9.1.
Supported Algorithms
9.2.
Keys
9.3.
Signing
9.3.1.
Rotation of Asymmetric Signing Keys
9.4.
Encryption
9.4.1.
Rotation of Asymmetric Encryption Keys
10.
Offline Access
11.
Using Refresh Tokens
11.1.
Refresh Request
11.2.
Refresh Response
11.3.
Refresh Error Response
12.
Serializations
12.1.
Query String Serialization
12.2.
Form Serialization
12.3.
JSON Serialization
13.
String Operations
14.
Implementation Considerations
14.1.
Mandatory to Implement Features for All OpenID Providers
14.2.
Mandatory to Implement Features for Dynamic OpenID Providers
14.3.
Discovery and Registration
14.4.
Related Specifications
15.
Security Considerations
15.1.
Request Disclosure
15.2.
Server Masquerading
15.3.
Token Manufacture/Modification
15.4.
Access Token Disclosure
15.5.
Server Response Disclosure
15.6.
Server Response Repudiation
15.7.
Request Repudiation
15.8.
Access Token Redirect
15.9.
Token Reuse
15.10.
Eavesdropping or Leaking Authorization Codes (Secondary Authenticator Capture)
15.11.
Token Substitution
15.12.
Timing Attack
15.13.
Other Crypto Related Attacks
15.14.
Signing and Encryption Order
15.15.
Issuer Identifier
15.16.
Implicit Grant Flow Threats
15.17.
TLS Requirements
15.18.
Lifetimes of Access Tokens and Refresh Tokens
15.19.
Symmetric Key Entropy
15.20.
Need for Signed Requests
15.21.
Need for Encrypted Requests
16.
Privacy Considerations
16.1.
Personally Identifiable Information
16.2.
Data Access Monitoring
16.3.
Correlation
16.4.
Offline Access
17.
IANA Considerations
17.1.
JSON Web Token Claims Registry
17.1.1.
Registry Contents
17.2.
OAuth Parameters Registry
17.2.1.
Registry Contents
17.3.
OAuth Extensions Error Registry
17.3.1.
Registry Contents
18.
References
18.1.
Normative References
18.2.
Informative References
Appendix A.
Authorization Examples
A.1.
Example using response_type=code
A.2.
Example using response_type=id_token
A.3.
Example using response_type=id_token token
A.4.
Example using response_type=code id_token
A.5.
Example using response_type=code token
A.6.
Example using response_type=code id_token token
A.7.
RSA Key Used in Examples
Appendix B.
Acknowledgements
Appendix C.
Notices
Appendix D.
Document History
§
Authors' Addresses
TOC |
OpenID Connect 1.0 is a simple identity layer on top of the OAuth 2.0 protocol. It allows Clients to verify the identity of the End-User based on the authentication performed by an Authorization Server, as well as to obtain basic profile information about the End-User in an interoperable and REST-like manner.
The OpenID Connect Core 1.0 specification defines the core OpenID Connect functionality: authentication built on top of OAuth 2.0 and the use of Claims to communicate information about the End-User. It also describes the security and privacy considerations for using OpenID Connect.
As background, the OAuth 2.0 Authorization Framework (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749] and OAuth 2.0 Bearer Token Usage (Jones, M. and D. Hardt, “The OAuth 2.0 Authorization Framework: Bearer Token Usage,” October 2012.) [RFC6750] specifications provide a general framework for third-party applications to obtain and use limited access to HTTP resources. They define mechanisms to obtain and use Access Tokens to access resources but do not define standard methods to provide identity information. Notably, without profiling OAuth 2.0, it is incapable of providing information about the authentication of an End-User.
This specification assumes that the Client has already obtained the locations of the OpenID Provider's endpoints, including its Authorization Endpoint and Token Endpoint. These URLs are normally obtained via Discovery, as described in OpenID Connect Discovery 1.0 (Sakimura, N., Bradley, J., Jones, M., and E. Jay, “OpenID Connect Discovery 1.0,” July 2013.) [OpenID.Discovery], or MAY be obtained via other mechanisms.
Likewise, this specification assumes that the Client has already obtained sufficient credentials to interact with the OpenID Provider. These credentials are normally obtained via Dynamic Registration, as described in OpenID Connect Dynamic Client Registration 1.0 (Sakimura, N., Bradley, J., and M. Jones, “OpenID Connect Dynamic Client Registration 1.0,” July 2013.) [OpenID.Registration], or MAY be obtained via other mechanisms.
TOC |
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.) [RFC2119].
Throughout this document, values are quoted to indicate that they are to be taken literally. When using these values in protocol messages, the quotes MUST NOT be used as part of the value.
All uses of JSON Web Signature (JWS) (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.) [JWS] and JSON Web Encryption (JWE) (Jones, M., Rescorla, E., and J. Hildebrand, “JSON Web Encryption (JWE),” May 2013.) [JWE] data structures in this specification utilize the JWS Compact Serialization or the JWE Compact Serialization; the JWS JSON Serialization and the JWE JSON Serialization are not used.
TOC |
This section defines the terminology used by this specification. This section is a normative portion of this specification, imposing requirements upon implementations. All the capitalized words in the text of this specification, such as "Issuer Identifier", reference these defined terms. Whenever the reader encounters them, their definitions found in this section must be followed.
This specification uses the terms "Access Token", "Refresh Token", "Authorization Code", "Authorization Grant", "Authorization Server", "Authorization Endpoint", "Client", "Client Identifier", "Client Secret", "Protected Resource", "Resource Owner", "Resource Server", and "Token Endpoint" defined by OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749], and the terms "Claim Names" and "Claim Values" defined by JSON Web Token (JWT) (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.) [JWT].
This specification also defines the following terms:
- Authentication
- Process of verifying that an Entity is the owner of an Identity. Typically this involves the verification of the current or past possession of particular credentials, including what the entity knows, possesses, has as physical features, or behaviors, or combinations of these utilizing heuristics. The entity is often an End-User or a Client.
- Authentication Request
- An OAuth 2.0 Authorization Request that requests that the End-User be authenticated by the Authorization Server.
- Authentication Context
- Information that the Relying Party can require before it makes an entitlement decision with respect to an authentication response. Such context can include, but is not limited to, the actual authentication method used or level of assurance such as ISO/IEC 29115 (International Organization for Standardization, “ISO/IEC 29115:2013 -- Information technology - Security techniques - Entity authentication assurance framework,” March 2013.) [ISO29115] entity authentication assurance level.
- Authentication Context Class
- Set of authentication methods or procedures that are considered to be equivalent to each other in a particular context.
- Authentication Context Class Reference
- Identifier for an Authentication Context Class.
- Authorization Code Flow
- OAuth 2.0 flow in which all tokens are returned from the Token Endpoint.
- Claim
- Piece of information asserted about an Entity.
- Claim Type
- Syntax used for representing a Claim Value. This specification defines Normal, Aggregated, and Distributed Claim Types.
- Claims Provider
- Server that can return Claims about an Entity.
- Credential
- Data presented as evidence of the right to use an identity or other resources.
- End-User
- Human Resource Owner.
- Entity
- Something that has a separate and distinct existence and that can be identified in a context. An End-User is one example of an Entity.
- Essential Claim
- Claim specified by the Client as being necessary to ensure a smooth authorization experience for the specific task requested by the End-User.
- Hybrid Flow
- OAuth 2.0 flow in which some tokens are returned from the Authorization Endpoint and others are returned from the Token Endpoint.
- ID Token
- JSON Web Token (JWT) (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.) [JWT] that contains Claims about the authentication event. It MAY contain other Claims.
- Identifier
- Value that uniquely characterizes an Entity in a specific context.
- Identity
- Set of attributes related to an Entity.
- Implicit Code Flow
- OAuth 2.0 flow in which all tokens are returned from the Authorization Endpoint.
- Issuer
- Entity that issues a set of Claims.
- Issuer Identifier
- Verifiable Identifier for an Issuer. An Issuer Identifier is a case sensitive URL using the https scheme that contains scheme, host, and OPTIONALLY, port number and path components and no query or fragment components.
- Message
- Request or a response between an OpenID Relying Party and an OpenID Provider.
- OpenID Provider (OP)
- OAuth 2.0 Authorization Server that is capable of providing Claims to a Relying Party about the authentication event and the End-User in an ID Token and/or a UserInfo Endpoint response.
- OP Endpoints
- Authorization Endpoint, Token Endpoint, and UserInfo Endpoint.
- Request Object
- JWT that contains a set of request parameters as its Claims.
- Request URI
- URL that references a resource containing a Request Object. The Request URI contents MUST be retrievable by the Authorization Server.
- Pairwise Pseudonymous Identifier (PPID)
- Identifier that identifies the Entity to a Relying Party that cannot be correlated with the Entity's PPID at another Relying Party.
- Personally Identifiable Information (PII)
- Information that (a) can be used to identify the natural person to whom such information relates, or (b) is or might be directly or indirectly linked to a natural person to whom such information relates.
- Relying Party (RP)
- OAuth 2.0 Client application requiring Claims from an OpenID Provider.
- Self-Issued OpenID Provider
- Personal OpenID Provider that issues self-signed ID Tokens.
- UserInfo Endpoint
- Protected resource that, when presented with an Access Token by the Client, returns authorized information about the End-User represented by the corresponding Authorization Grant.
- Validation
- Process intended to establish the soundness or correctness of a construct.
- Verification
- Process intended to test or prove the truth or accuracy of a fact or value.
- Voluntary Claim
- Claim specified by the Client as being useful but not Essential for the specific task requested by the End-User.
For more background on some of the terminology used, see Internet Security Glossary, Version 2 (Shirey, R., “Internet Security Glossary, Version 2,” August 2007.) [RFC4949], ISO/IEC 29115 Entity Authentication Assurance (International Organization for Standardization, “ISO/IEC 29115:2013 -- Information technology - Security techniques - Entity authentication assurance framework,” March 2013.) [ISO29115], and ITU-T X.1252 (International Telecommunication Union, “ITU-T Recommendation X.1252 -- Cyberspace security -- Identity management -- Baseline identity management terms and definitions,” November 2010.) [X.1252].
TOC |
The OpenID Connect protocol, in abstract, follows the following steps.
TOC |
Authentication is performed to log in the End-User or to determine that the End-User is already logged in. Authentication Requests can follow one of three paths: the Authorization Code Flow, the Implicit Flow, or the Hybrid Flow. The Authorization Code Flow is suitable for Clients that can securely maintain a Client Secret between themselves and the Authorization Server whereas, the Implicit Flow is suitable for Clients that cannot. The Hybrid Flow combines aspects of the Authorization Code Flow and the Implicit Flow. The flows determine how the ID Token and Access Token are returned to the Client. The flow used is determined by the response_type value contained in the Authorization Request.
TOC |
This section describes how to perform authentication using the Authorization Code Flow. When using the Authorization Code Flow, all tokens are returned from the Token Endpoint.
The Authorization Code Flow returns an Authorization Code to the Client, which can then exchange it for an Access Token directly. This provides the benefit of not exposing the Access Token to the Resource Owner and possibly other malicious applications with access to the Resource Owner's User-Agent. The Authorization Server can also authenticate the Client before exchanging the Authorization Code for an Access Token. The Authorization Code flow is suitable for Clients that can securely maintain a Client Secret between themselves and the Authorization Server.
TOC |
The Authorization Code Flow goes through the following steps.
TOC |
The Authorization Endpoint performs authentication of the End-User and requests authorization from the End-User to release information to an OpenID Connect Relying Party (Client). When an End-User accesses a Relying Party application that requires the End-User's identity and other information, it sends the User-Agent to the Authorization Server's Authorization Endpoint for authentication and authorization.
TOC |
When the Client wishes to access a Protected Resource and the End-User Authorization has not yet been obtained, the Client prepares an Authorization Request to the Authorization Endpoint.
An Authorization Request is a message sent from an RP to the OP's Authorization Endpoint. It is an extended OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749] Authorization Request. Section 4.1.1 and 4.2.1 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749] define the OAuth 2.0 Authorization Request parameters.
Communication with the Authorization Endpoint MUST utilize TLS. See Section 15.17 (TLS Requirements) for more information on using TLS.
Authorization Servers MUST support the use of the HTTP GET and POST methods defined in RFC 2616 (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.) [RFC2616] at the Authorization Endpoint.
Clients MAY use the HTTP GET or POST methods to send the Authorization Request to the Authorization Server. If using the HTTP GET method, the request parameters are serialized using URI Query String Serialization, per Section 12.1 (Query String Serialization). If using the HTTP POST method, the request parameters are serialized using Form Serialization, per Section 12.2 (Form Serialization).
The following is a non-normative example request using this flow (with line wraps within values for display purposes only):
GET /authorize? response_type=code &scope=openid%20profile%20email &client_id=s6BhdRkqt3 &state=af0ifjsldkj &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb HTTP/1.1 Host: server.example.com
TOC |
OpenID Connect uses the following OAuth 2.0 request parameters with the Authorization Code Flow:
- response_type
- REQUIRED. OAuth 2.0 registered response type value that determines how the Authorization Response is returned to the Client. When using the Authorization Code Flow, this value MUST be code.
- client_id
- REQUIRED. OAuth 2.0 Client Identifier.
- scope
- REQUIRED. Space delimited, case sensitive list of ASCII OAuth 2.0 scope values. OpenID Connect requests MUST contain the openid scope value. Other scope values MAY be present. See Sections 4.1 (Requesting Claims using Scope Values) and 10 (Offline Access) for additional scope values defined by this specification.
- redirect_uri
- REQUIRED. Redirection URI to which the response will be sent. This MUST be pre-registered with the OpenID Provider. This URI MUST exactly match one of the redirect_uris registered for the Client, with the matching performed as described in Section 6.2.1 of [RFC3986] (Berners-Lee, T., Fielding, R., and L. Masinter, “Uniform Resource Identifier (URI): Generic Syntax,” January 2005.) (Simple String Comparison). When using this flow, the redirection URI MAY use the http scheme, provided that the Client Type is confidential, as defined in Section 2.1 of OAuth 2.0; otherwise, it MUST use the https scheme.
- state
- RECOMMENDED. Opaque value used to maintain state between the request and the callback. Typically, Cross-Site Request Forgery (CSRF, XSRF) mitigation is done by cryptographically binding the value of this parameter with the browser cookie.
This specification also defines the following request parameters for use with the Authorization Code Flow:
- nonce
- OPTIONAL. String value used to associate a Client session with an ID Token, and to mitigate replay attacks. The value is passed through unmodified from the Authorization Request to the ID Token. Sufficient entropy MUST be present in the nonce values used to prevent attackers from guessing values. One method to achieve this is to store a random value as a signed session cookie, and pass the value in the nonce parameter. In that case, the nonce in the returned ID Token can be compared to the signed session cookie to detect ID Token replay by third parties.
- display
- OPTIONAL. ASCII string value that specifies how the Authorization Server displays the authentication and consent user interface pages to the End-User. The defined values are:
- page
- The Authorization Server SHOULD display authentication and consent UI consistent with a full User-Agent page view. If the display parameter is not specified this is the default display mode.
- popup
- The Authorization Server SHOULD display authentication and consent UI consistent with a popup User-Agent window. The popup User-Agent window SHOULD be 450 pixels wide and 500 pixels tall.
- touch
- The Authorization Server SHOULD display authentication and consent UI consistent with a device that leverages a touch interface. The Authorization Server MAY attempt to detect the touch device and further customize the interface.
- wap
- The Authorization Server SHOULD display authentication and consent UI consistent with a "feature phone" type display.
- prompt
- OPTIONAL. Space delimited, case sensitive list of ASCII string values that specifies whether the Authorization Server prompts the End-User for reauthentication and consent. The defined values are:
The prompt parameter can be used by the Client to make sure that the End-User is still present for the current session or to bring attention to the request. If this parameter contains none with any other value, an error is returned.
- none
- The Authorization Server MUST NOT display any authentication or consent user interface pages. An error is returned if the End-User is not already authenticated or the Client does not have pre-configured consent for the requested Claims or does not fulfill other conditions for processing. This can be used as a method to check for existing authentication and/or consent.
- login
- The Authorization Server SHOULD prompt the End-User for reauthentication. If it cannot prompt the End-User, it MUST return an error.
- consent
- The Authorization Server SHOULD prompt the End-User for consent before returning information to the Client.
- select_account
- The Authorization Server SHOULD prompt the End-User to select a user account. This allows an End-User who has multiple accounts at the Authorization Server to select amongst the multiple accounts that they might have current sessions for. If it cannot prompt the End-User, it MUST return an error.
- max_age
- OPTIONAL. Maximum Authentication Age. Specifies the allowable elapsed time in seconds since the last time the End-User was actively authenticated. If the elapsed time is greater than this value, the OP MUST attempt to actively re-authenticate the End-User. (The max_age request parameter corresponds to the OpenID 2.0 PAPE (Recordon, D., Jones, M., Bufu, J., Ed., Daugherty, J., Ed., and N. Sakimura, “OpenID Provider Authentication Policy Extension 1.0,” December 2008.) [OpenID.PAPE] max_auth_age request parameter.) When max_age is used, the ID Token returned MUST include an auth_time Claim Value.
- ui_locales
- OPTIONAL. End-User's preferred languages and scripts for the user interface, represented as a space-separated list of BCP47 (Phillips, A. and M. Davis, “Tags for Identifying Languages,” September 2009.) [RFC5646] language tag values, ordered by preference. For instance, the value "fr-CA fr en" represents a preference for French as spoken in Canada, then French (without a region designation), followed by English (without a region designation). An error SHOULD NOT result if some or all of the requested locales are not supported by the OpenID Provider.
- id_token_hint
- OPTIONAL. Previously issued ID Token passed to the Authorization Server as a hint about the End-User's current or past authenticated session with the Client. This SHOULD be present when prompt=none is used. If the End-User identified by the ID Token is logged in or is logged in by the request, then the Authorization Server returns a positive response; otherwise, it SHOULD return a negative response. The Authorization Server need not be listed as an audience of the ID Token when it is used as an id_token_hint value.
- If the ID Token received by the RP is encrypted, the Client MUST decrypt the signed ID Token contained within the encrypted ID Token. The Client MAY re-encrypt the signed ID token to the Authentication Server using a key that enables the server to decrypt the ID Token.
- For a Self-Issued ID Token, the sub (subject) of the signed ID Token MUST be sent as the kid (Key ID) of the JWE.
- login_hint
- OPTIONAL. Hint to the Authorization Server about the login identifier the End-User might use to log in (if necessary). This hint can be used by an RP if it first asks the End-User for their e-mail address (or other identifier) and then wants to pass that value as a hint to the discovered authorization service. It is RECOMMENDED that the hint value match the value used for discovery. This value MAY also be a phone number in the format specified for the phone_number Claim. The use of this parameter is left to the OP's discretion.
- acr_values
- OPTIONAL. Requested Authentication Context Class Reference values. Space-separated string that specifies the acr values that the Authorization Server is being requested to use for processing this Authentication Request, with the values appearing in order of preference. The Authentication Context Class satisfied by the authentication performed is returned as the acr Claim Value, as specified in Section 2.1.3.5 (ID Token). The acr Claim is requested as a Voluntary Claim by this parameter.
Other parameters MAY be sent. See Sections 2.2.2.1.1 (Authorization Request Parameters), 2.3.2.1.1 (Authorization Request Parameters), 4.4 (Requesting Claims Locales with the "claims_locales" Request Parameter), 4.5 (Requesting Claims using the "claims" Request Parameter), 5 (Passing Request Parameters as JWTs), and 6.2.1 (Providing Information with the "registration" Request Parameter) for additional Authorization Request parameters and parameter values defined by this specification.
TOC |
The Authorization Server MUST validate the request received as follows:
As specified in OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749], Authorization Servers SHOULD ignore unrecognized request parameters.
If the Authorization Server encounters any error, it MUST return an error response.
TOC |
The Authorization Server validates the request to ensure all REQUIRED parameters are present and all parameters are valid. If the request is valid, the Authorization Server attempts to log in the End-User or determines whether he is logged in, depending upon the request parameter values used. The methods used by the Authorization Server to log in the End-User (e.g. username and password, session cookies, etc.) are beyond the scope of this specification. An authentication user interface MAY be displayed by the Authorization Server, depending upon the request parameter values used and the authentication methods used.
The Authorization Server MUST attempt to log in the End-User in the following cases:
The Authorization Server MUST NOT interact with the End-User in the following case:
The Authorization Server MUST employ appropriate measures against Cross-Site Request Forgery and Clickjacking as, described in Sections 10.12 and 10.13 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749].
TOC |
Once the End-User is authenticated, the Authorization Server MUST obtain an authorization decision. This MAY be done by presenting the End-User with a dialogue that allows the End-User to recognize what he is consenting to and obtain his consent or by establishing consent via conditions for processing or other means (for example, via previous administrative consent).
The Authorization Server MUST attempt to request authorization from the End-User in the following cases:
The Authorization Server MUST NOT request End-User authorization in the following cases:
The Authorization Server MUST employ countermeasures against Cross-Site Request Forgery and Clickjacking when interacting with the End-User.
TOC |
Once the authorization is determined, the Authorization Server returns a successful or error response. This section describes the successful response. Section 2.1.2.7 (Authorization Error Response) describes the error response.
An Authorization Response is a message returned from the OP's Authorization Endpoint in response to the Authorization Request by the RP. Response parameters are returned to the Client by adding them to the redirect_uri specified in the Authorization Request using the "application/x-www-form-urlencoded" format.
This specification only describes OAuth 2.0 Bearer Token Usage (Jones, M. and D. Hardt, “The OAuth 2.0 Authorization Framework: Bearer Token Usage,” October 2012.) [RFC6750]. The OAuth 2.0 response parameter token_type MUST be set to Bearer unless another Token Type has been negotiated with the Client.
When using the Authorization Code Flow, the Authorization Response MUST return the parameters defined in Section 4.1.2 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749].
The following is a non-normative example successful response using this flow (with line wraps within values for display purposes only):
HTTP/1.1 302 Found Location: https://client.example.org/cb? code=SplxlOBeZQQYbYS6WxSbIA &state=af0ifjsldkj
TOC |
When using the Authorization Code Flow, the Client MUST validate the response according to RFC 6749, especially Sections 4.1.2 and 10.12.
TOC |
If the End-User denies the request or the End-User authentication fails, the OP (Authorization Server) informs the RP (Client) by using the Error Response parameters defined in Sections 4.1.2.1 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749].
The Authorization Server returns the Client to the redirection URI specified in the Authorization Request with the appropriate error parameters. No other parameters SHOULD be returned.
In addition to the error codes defined in Sections 4.1.2.1 and 4.2.2.1 of OAuth 2.0, this specification also defines the following error codes:
- interaction_required
- The Authorization Server requires End-User interaction of some form to proceed. This error MAY be returned when the prompt parameter in the Authorization Request is set to none to request that the Authorization Server SHOULD NOT display any user interfaces to the End-User, but the Authorization Request cannot be completed without displaying a user interface for End-User interaction.
- login_required
- The Authorization Server requires End-User authentication. This error MAY be returned when the prompt parameter in the Authorization Request is set to none to request that the Authorization Server SHOULD NOT display any user interfaces to the End-User, but the Authorization Request cannot be completed without displaying a user interface for user authentication.
- session_selection_required
- The End-User is REQUIRED to select a session at the Authorization Server. The End-User MAY be authenticated at the Authorization Server with different associated accounts, but the End-User did not select a session. This error MAY be returned when the prompt parameter in the Authorization Request is set to none to request that the Authorization Server SHOULD NOT display any user interfaces to the End-User, but the Authorization Request cannot be completed without displaying a user interface to prompt for a session to use.
- consent_required
- The Authorization Server requires End-User consent. This error MAY be returned when the prompt parameter in the Authorization Request is set to none to request that the Authorization Server SHOULD NOT display any user interfaces to the End-User, but the Authorization Request cannot be completed without displaying a user interface for End-User consent.
- invalid_request_uri
- The request_uri in the Authorization Request returns an error or contains invalid data.
- invalid_request_object
- The request parameter contains an invalid Request Object.
- registration_not_supported
- The OP does not support use of the registration parameter.
- request_not_supported
- The OP does not support use of the request parameter.
- request_uri_not_supported
- The OP does not support use of the request_uri parameter.
The error response parameters are the following:
- error
- REQUIRED. Error code.
- error_description
- OPTIONAL. Human-readable ASCII encoded text description of the error.
- error_uri
- OPTIONAL. URI of a web page that includes additional information about the error.
- state
- OAuth 2.0 state value. REQUIRED if the Authorization Request included the state parameter. Set to the value received from the Client.
When using the Authorization Code Flow, the response parameters are added to the query component of the redirection URI.
The following is a non-normative example error response using this flow (with line wraps within values for display purposes only):
HTTP/1.1 302 Found Location: https://client.example.org/cb? error=invalid_request &error_description= the%20request%20is%20not%20valid%20or%20malformed &state=af0ifjsldkj
TOC |
When using the Authorization Code Flow, the RP (Client) sends a Token Request to the Token Endpoint to obtain a Token Response, which includes an ID Token and an Access Token and MAY include a Refresh Token and other results.
Clients MUST use the HTTP POST method to make requests to the Token Endpoint. Request parameters are added using Form Serialization, per Section 12.2 (Form Serialization). The Token Endpoint MUST support the use of the HTTP POST method defined in RFC 2616 (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.) [RFC2616] at the Token Endpoint.
Communication with the Token Endpoint MUST utilize TLS. See Section 15.17 (TLS Requirements) for more information on using TLS.
All Token Endpoint responses that contain tokens, secrets, or other sensitive information MUST include the following HTTP response header fields and values:
Header Name | Header Value |
---|---|
Cache-Control | no-store |
Pragma | no-cache |
HTTP Response Headers and Values |
Clients MAY provide authentication parameters in the request to the Token Endpoint, as described in Section 8 (Client Authentication).
TOC |
A Client using the Authorization Code Flow obtains an ID Token and an Access Token by authenticating with the Authorization Server and presenting its Authorization Grant (in the form of an Authorization Code) to the Token Endpoint.
To obtain an ID Token, Access Token, or Refresh Token, the Client MUST authenticate to the Token Endpoint using the authentication method registered for its client_id, as described in Section 8 (Client Authentication). The Client sends the parameters via HTTPS POST to the Token Endpoint using Form Serialization, per Section 12.2 (Form Serialization), as described in Section 4.1.3 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749].
The following is a non-normative example of a Token Request (with line wraps within values for display purposes only):
POST /token HTTP/1.1 Host: server.example.com Content-Type: application/x-www-form-urlencoded Authorization: Basic czZCaGRSa3F0MzpnWDFmQmF0M2JW grant_type=authorization_code&code=SplxlOBeZQQYbYS6WxSbIA &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb
TOC |
Upon receipt of the request, the Authorization Server MUST:
TOC |
Upon receipt of the Token Request, the Authorization Server MUST return either a successful response or an error response that corresponds to the received Authorization Code.
After receiving and validating a valid and authorized Token Request from the Client, the Authorization Server returns a successful response that includes an ID Token and an Access Token. The parameters in the successful response are defined in Section 4.1.4 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749].
This specification only describes OAuth 2.0 Bearer Token Usage (Jones, M. and D. Hardt, “The OAuth 2.0 Authorization Framework: Bearer Token Usage,” October 2012.) [RFC6750]. The OAuth 2.0 response parameter token_type MUST be set to Bearer unless another Token Type has been negotiated with the Client. Servers SHOULD support OAuth 2.0 Bearer Token Usage (Jones, M. and D. Hardt, “The OAuth 2.0 Authorization Framework: Bearer Token Usage,” October 2012.) [RFC6750] for interoperability. For security reasons, Servers MAY only allow Clients to register specific token_type values. Clients MUST support OAuth 2.0 Bearer Token Usage (Jones, M. and D. Hardt, “The OAuth 2.0 Authorization Framework: Bearer Token Usage,” October 2012.) [RFC6750] and MAY support other token_type.
In addition to the OAuth 2.0 response parameters, the following parameters MUST be included in the response if the grant_type value is authorization_code and the Authorization Request scope parameter contains openid:
- id_token
- ID Token value associated with the authenticated session.
An id_token MUST be returned when the grant_type value is authorization_code and MAY be returned when other grant types are used.
A successful response uses the application/json media type.
The following is a non-normative example of a successful Token Response:
HTTP/1.1 200 OK Content-Type: application/json Cache-Control: no-store Pragma: no-cache { "access_token": "SlAV32hkKG", "token_type": "Bearer", "refresh_token": "8xLOxBtZp8", "expires_in": 3600, "id_token": "eyJhbGciOiJSUzI1NiJ9.ew0KICAgICJpc3MiOiAiaHR0cDovL 3NlcnZlci5leGFtcGxlLmNvbSIsDQogICAgInVzZXJfaWQiOiAiMjQ4Mjg5NzYxM DAxIiwNCiAgICAiYXVkIjogInM2QmhkUmtxdDMiLA0KICAgICJub25jZSI6ICJuL TBTNl9XekEyTWoiLA0KICAgICJleHAiOiAxMzExMjgxOTcwLA0KICAgICJpYXQiO iAxMzExMjgwOTcwDQp9.lsQI_KNHpl58YY24G9tUHXr3Yp7OKYnEaVpRL0KI4szT D6GXpZcgxIpkOCcajyDiIv62R9rBWASV191Akk1BM36gUMm8H5s8xyxNdRfBViCa xTqHA7X_vV3U-tSWl6McR5qaSJaNQBpg1oGPjZdPG7zWCG-yEJC4-Fbx2FPOS7-h 5V0k33O5Okd-OoDUKoFPMd6ur5cIwsNyBazcsHdFHqWlCby5nl_HZdW-PHq0gjzy JydB5eYIvOfOHYBRVML9fKwdOLM2xVxJsPwvy3BqlVKc593p2WwItIg52ILWrc6A tqkqHxKsAXLVyAoVInYkl_NDBkCqYe2KgNJFzfEC8g" }
As specified in OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749], Clients SHOULD ignore unrecognized response parameters.
TOC |
The Client MUST validate the Token Response as follows:
TOC |
The ID Token is a security token that contains Claims about the authentication event and other requested Claims. The ID Token is represented as a JSON Web Token (JWT) (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.) [JWT].
The ID Token is used to manage the authentication event and user identifier and is scoped to a particular Client via the aud (audience) and nonce Claims.
The following Claims are used within the ID Token when using this flow:
- iss
- REQUIRED. Issuer Identifier for the Issuer of the response. The iss value is a case sensitive URL using the https scheme that contains scheme, host, and OPTIONALLY, port number and path components and no query or fragment components.
- sub
- REQUIRED. Subject identifier. A locally unique and never reassigned identifier within the Issuer for the End-User, which is intended to be consumed by the Client, e.g., 24400320 or AItOawmwtWwcT0k51BayewNvutrJUqsvl6qs7A4. It MUST NOT exceed 255 ASCII characters in length. The sub value is a case sensitive string.
- aud
- REQUIRED. Audience(s) that this ID Token is intended for. It MUST contain the OAuth 2.0 client_id of the Relying Party as an audience value. It MAY also contain identifiers for other audiences. In the general case, the aud value is an array of case sensitive strings. In the special case when there is one audience, the aud value MAY be a single case sensitive string.
- exp
- REQUIRED. Expiration time on or after which the ID Token MUST NOT be accepted for processing. The processing of this parameter requires that the current date/time MUST be before the expiration date/time listed in the value. Implementers MAY provide for some small leeway, usually no more than a few minutes, to account for clock skew. The time is represented as the number of seconds from 1970-01-01T0:0:0Z as measured in UTC until the date/time. See RFC 3339 (Klyne, G., Ed. and C. Newman, “Date and Time on the Internet: Timestamps,” July 2002.) [RFC3339] for details regarding date/times in general and UTC in particular. The exp value is a number.
- iat
- REQUIRED. Time at which the JWT was issued. The time is represented as the number of seconds from 1970-01-01T0:0:0Z as measured in UTC until the date/time. The iat value is a number.
- auth_time
- OPTIONAL or REQUIRED. Time when the End-User authentication occurred. The time is represented as the number of seconds from 1970-01-01T0:0:0Z as measured in UTC until the date/time. When a max_age request is made or when auth_time is requested as an Essential Claim, then this Claim is REQUIRED. (The auth_time Claim semantically corresponds to the OpenID 2.0 PAPE (Recordon, D., Jones, M., Bufu, J., Ed., Daugherty, J., Ed., and N. Sakimura, “OpenID Provider Authentication Policy Extension 1.0,” December 2008.) [OpenID.PAPE] auth_time response parameter.) The auth_time value is a number.
- nonce
- OPTIONAL or REQUIRED. String value used to associate a Client session with an ID Token, and to mitigate replay attacks. The value is passed through unmodified from the Authorization Request to the ID Token. If present in the ID Token, Clients MUST verify that the nonce Claim Value is equal to the value of the nonce parameter sent in the Authorization Request. If present in the Authorization Request, Authorization Servers MUST include a nonce Claim in the ID Token with the Claim Value being the nonce value sent in the Authorization Request. Authorization Servers SHOULD perform no other processing on nonce values used. Use of the nonce is REQUIRED for all requests where an ID Token is returned directly from the Authorization Endpoint. It is OPTIONAL when the ID Token is returned from the Token Endpoint. The nonce value is a case sensitive string.
- at_hash
- OPTIONAL. Access Token hash value. Its value is the base64url encoding of the left-most half of the hash of the octets of the ASCII representation of the access_token value, where the hash algorithm used is the hash algorithm used in the alg parameter of the ID Token's JWS (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.) [JWS] header. For instance, if the alg is RS256, hash the access_token value with SHA-256, then take the left-most 128 bits and base64url encode them. The at_hash value is a case sensitive string.
- acr
- OPTIONAL. Authentication Context Class Reference. String specifying an Authentication Context Class Reference value that identifies the Authentication Context Class that the authentication performed satisfied. The value "0" indicates the End-User authentication did not meet the requirements of ISO/IEC 29115 (International Organization for Standardization, “ISO/IEC 29115:2013 -- Information technology - Security techniques - Entity authentication assurance framework,” March 2013.) [ISO29115] level 1. Authentication using a long-lived browser cookie, for instance, is one example where the use of "level 0" is appropriate. Authentications with level 0 SHOULD never be used to authorize access to any resource of any monetary value. (This corresponds to the OpenID 2.0 PAPE (Recordon, D., Jones, M., Bufu, J., Ed., Daugherty, J., Ed., and N. Sakimura, “OpenID Provider Authentication Policy Extension 1.0,” December 2008.) [OpenID.PAPE] nist_auth_level 0.) An absolute URI or a registered name (Johansson, L., “An IANA Registry for Level of Assurance (LoA) Profiles,” August 2012.) [RFC6711] SHOULD be used as the acr value; registered names MUST NOT be used with a different meaning than that which is registered. Parties using this claim will need to agree upon the meanings of the values used, which may be context-specific. The acr value is a case sensitive string.
- amr
- OPTIONAL. Authentication Methods References. JSON array of strings that are identifiers for authentication methods used in the authentication. For instance, values might indicate that both password and OTP authentication methods were used. The definition of particular values to be used in the amr Claim is beyond the scope of this specification. Parties using this claim will need to agree upon the meanings of the values used, which may be context-specific. The amr value is an array of case sensitive strings.
- azp
- OPTIONAL or REQUIRED. Authorized Party - the party to which the ID Token was issued. If present, it MUST contain the OAuth 2.0 client_id of the party that will be using it. This Claim is only REQUIRED when the party requesting the ID Token is not the same as the sole audience of the ID Token. It MAY be included even when the Authorized Party is the same as the sole audience. The azp value is a case sensitive string containing a StringOrURI value.
ID Tokens MAY contain other Claims. Any Claims used that are not understood MUST be ignored. See Sections 2.3.2.9 (ID Token), 4.2 (Standard Claims), and 6.4 (Self-Issued OpenID Provider Response) for additional Claims defined by this specification.
ID Tokens MUST be signed using JWS (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.) [JWS] and OPTIONALLY both signed and then encrypted using JWS (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.) [JWS] and JWE (Jones, M., Rescorla, E., and J. Hildebrand, “JSON Web Encryption (JWE),” May 2013.) [JWE] respectively, thereby providing authentication, integrity, non-repudiation, and optionally, confidentiality, per Section 15.14 (Signing and Encryption Order). ID Tokens MUST NOT use none as the alg value.
ID Tokens SHOULD NOT use the JWS or JWE x5u, x5c, jku, or jwk header parameter fields. Instead, key values and key references used for ID Tokens are communicated in advance using Discovery and Registration parameters.
The following is a non-normative example of an ID Token claims set:
{ "iss": "https://server.example.com", "sub": "24400320", "aud": "s6BhdRkqt3", "nonce": "n-0S6_WzA2Mj", "exp": 1311281970, "iat": 1311280970, "auth_time": 1311280969, "acr": "urn:mace:incommon:iap:silver", "at_hash": "MTIzNDU2Nzg5MDEyMzQ1Ng" }
TOC |
Clients MUST validate the ID Token in the Token Response, in the following manner:
TOC |
When using the Authorization Code Flow, if the ID Token contains an at_hash Claim, the Client MAY use it to validate the Access Token the same manner as for the Implicit Flow, as defined in Section 2.2.2.7 (Access Token Validation).
TOC |
If the Token Request is invalid or unauthorized, the Authorization Server constructs the error response. The parameters of the Token Error Response are defined as in Section 5.2 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749]. The HTTP response body uses the application/json media type with HTTP response code of 400.
The following is a non-normative example Token Error Response:
HTTP/1.1 400 Bad Request Content-Type: application/json Cache-Control: no-store Pragma: no-cache { "error": "invalid_request" }
TOC |
This section describes how to perform authentication using the Implicit Flow. When using the Implicit Flow, all tokens are returned from the Authorization Endpoint; the Token Endpoint is not used.
The Implicit Flow is mainly used by Clients implemented in a browser using a scripting language. The Access Token and ID Token are returned directly to the Client, which may expose them to the Resource Owner and other applications that have access to the Resource Owner's User-Agent. The Authorization Server does not perform Client Authentication before issuing the Access Token.
TOC |
The Implicit Flow follows the following steps:
TOC |
When using the Implicit Flow, the Authorization Endpoint is used in the same manner as for the Authorization Code Flow, as defined in Section 2.1.2 (Authorization Endpoint), with the exception of the differences specified in this section.
TOC |
When using the Implicit Flow, Authorization Requests are made in the same manner as for the Authorization Code Flow, as defined in Section 2.1.2.1 (Authorization Request), with the exception of the differences specified in this section.
The following is a non-normative example request using the Implicit Flow (with line wraps within values for display purposes only):
GET /authorize? response_type=id_token%20token &client_id=s6BhdRkqt3 &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb &scope=openid%20profile &state=af0ifjsldkj &nonce=n-0S6_WzA2Mj HTTP/1.1 Host: server.example.com
TOC |
When using the Implicit Flow, the same Authorization Request parameters are used as for the Code Flow, as defined in Section 2.1.2.1.1 (Authorization Request Parameters), with the exception of the differences specified in this section.
- response_type
- REQUIRED. OAuth 2.0 registered response type value that determines how the Authorization Response is returned to the Client. When using the Implicit Flow, this value MUST be id_token token or id_token. The meanings of both of these values are defined in OAuth 2.0 Multiple Response Type Encoding Practices (de Medeiros, B., Ed., Scurtescu, M., and P. Tarjan, “OAuth 2.0 Multiple Response Type Encoding Practices,” June 2013.) [OAuth.Responses]. No Access Token is returned when the value is id_token.
- (Note that while OAuth 2.0 also defines the token response type value for the Implicit Flow, OpenID Connect does not use this response type, since no ID Token is returned.)
- redirect_uri
- REQUIRED. Redirection URI to which the response will be sent. This MUST be pre-registered with the OpenID Provider. This URI MUST exactly match one of the redirect_uris registered for the Client, with the matching performed as described in Section 6.2.1 of [RFC3986] (Berners-Lee, T., Fielding, R., and L. Masinter, “Uniform Resource Identifier (URI): Generic Syntax,” January 2005.) (Simple String Comparison). When using this flow, the redirection URI MUST NOT use the http scheme unless the Client is a native application, in which case it MAY use the http: scheme with localhost as the hostname.
- nonce
- REQUIRED. String value used to associate a Client session with an ID Token, and to mitigate replay attacks. The value is passed through unmodified from the Authorization Request to the ID Token. Sufficient entropy MUST be present in the nonce values used to prevent attackers from guessing values. One method to achieve this is to store a random value as a signed session cookie, and pass the value in the nonce parameter. In that case, the nonce in the returned ID Token can be compared to the signed session cookie to detect ID Token replay by third parties.
TOC |
When using the Implicit Flow, the Authorization Request is validated in the same manner as for the Authorization Code Flow, as defined in Section 2.1.2.2 (Authorization Request Validation).
TOC |
When using the Implicit Flow, End-User Authentication is performed in the same manner as for the Authorization Code Flow, as defined in Section 2.1.2.3 (Authorization Server Authenticates End-User).
TOC |
When using the Implicit Flow, End-User Consent is obtained in the same manner as for the Authorization Code Flow, as defined in Section 2.1.2.4 (Authorization Server Obtains End-User Consent/Authorization).
TOC |
When using the Implicit Flow, Authorization Responses are made in the same manner as for the Authorization Code Flow, as defined in Section 2.1.2.5 (Authorization Response), with the exception of the differences specified in this section.
When using the Implicit Flow, all response parameters are added to the fragment component of the redirection URI, as specified in OAuth 2.0 Multiple Response Type Encoding Practices (de Medeiros, B., Ed., Scurtescu, M., and P. Tarjan, “OAuth 2.0 Multiple Response Type Encoding Practices,” June 2013.) [OAuth.Responses]. These parameters are returned:
- access_token
- Access Token for the UserInfo Endpoint. This is returned unless the response_type value used is id_token.
- token_type
- OAuth 2.0 Token Type value. The value MUST be Bearer or another token_type value that the Client has negotiated with the Authorization Server. Clients implementing this profile MUST support the OAuth 2.0 Bearer Token Usage (Jones, M. and D. Hardt, “The OAuth 2.0 Authorization Framework: Bearer Token Usage,” October 2012.) [RFC6750] specification. This profile only describes the use of bearer tokens. This is returned in the same cases as access_token is.
- id_token
- REQUIRED. ID Token.
- state
- OAuth 2.0 state value. REQUIRED if the state parameter is present in the Client Authorization Request. Clients MUST verify that the state value is equal to the value of state parameter in the Authorization Request.
- expires_in
- OPTIONAL. Expiration time of the Access Token in seconds since the response was generated.
The following is a non-normative example of a successful response using the Implicit Flow (with line wraps for the display purposes only):
HTTP/1.1 302 Found Location: https://client.example.org/cb# access_token=SlAV32hkKG &token_type=bearer &id_token=eyJ0 ... NiJ9.eyJ1c ... I6IjIifX0.DeWt4Qu ... ZXso &expires_in=3600 &state=af0ifjsldkj
TOC |
The Client MUST provide a way for the User-Agent to parse the fragment encoded response and post it to the Web Server Client for validation.
The following is an example of a JavaScript file that a Client might host at its redirect_uri. This is loaded by the redirect from the Authorization Server. The fragment component is parsed and then sent by POST to a URI that will validate the information received.
Following is a non-normative example of a Redirect URI response:
GET /cb HTTP/1.1 Host: client.example.org HTTP/1.1 200 OK Content-Type: text/html <script type="text/javascript"> // First, parse the query string var params = {}, postBody = location.hash.substring(1), regex = /([^&=]+)=([^&]*)/g, m; while (m = regex.exec(postBody)) { params[decodeURIComponent(m[1])] = decodeURIComponent(m[2]); } // And send the token over to the server var req = new XMLHttpRequest(); // using POST so query isn't logged req.open('POST', 'https://' + window.location.host + '/catch_response', true); req.setRequestHeader('Content-Type', 'application/x-www-form-urlencoded'); req.onreadystatechange = function (e) { if (req.readyState == 4) { if (req.status == 200) { // If the response from the POST is 200 OK, perform a redirect window.location = 'https://' + window.location.host + '/redirect_after_login' } // if the OAuth response is invalid, generate an error message else if (req.status == 400) { alert('There was an error processing the token') } else { alert('Something other than 200 was returned') } } }; req.send(postBody);
TOC |
When using the Implicit Flow, the Client MUST validate the response as follows:
TOC |
To validate an Access Token issued from the Authorization Endpoint with an ID Token, the Client SHOULD do the following:
TOC |
When using the Implicit Flow, the contents of the ID Token are the same as for the Authorization Code Flow, as defined in Section 2.1.3.5 (ID Token), with the exception of the differences specified in this section.
The requirements for using the following Claims are as follows when using the Implicit Flow:
- nonce
- REQUIRED. String value used to associate a Client session with an ID Token, and to mitigate replay attacks. The value is passed through unmodified from the Authorization Request to the ID Token. Clients MUST verify that the nonce Claim Value is equal to the value of the nonce parameter sent in the Authorization Request. Authorization Servers MUST include a nonce Claim in the ID Token with the Claim Value being the nonce value sent in the Authorization Request. Use of the nonce is REQUIRED when using the Implicit Flow. The nonce value is a case sensitive string.
- at_hash
- OPTIONAL or REQUIRED. Access Token hash value. Its value is the base64url encoding of the left-most half of the hash of the octets of the ASCII representation of the access_token value, where the hash algorithm used is the hash algorithm used in the alg parameter of the ID Token's JWS (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.) [JWS] header. For instance, if the alg is RS256, hash the access_token value with SHA-256, then take the left-most 128 bits and base64url encode them. The at_hash value is a case sensitive string.
- If the ID Token is issued from the Authorization Endpoint with an access_token, which is the case with the response_type value id_token token, this is REQUIRED.
TOC |
When using the Implicit Flow, the contents of the ID Token MUST be validated in the same manner as for the Authorization Code Flow, as defined in Section 2.1.3.6 (ID Token Validation), with the exception of the differences specified in this section.
TOC |
When using the Implicit Flow, Authorization Error Responses are made in the same manner as for the Authorization Code Flow, as defined in Section 2.1.2.7 (Authorization Error Response), with the exception of the differences specified in this section.
If the End-User denies the request or the End-User authentication fails, the Authorization Server MUST return the error Authorization Response as defined in 4.2.2.1 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749] and OAuth 2.0 Multiple Response Type Encoding Practices (de Medeiros, B., Ed., Scurtescu, M., and P. Tarjan, “OAuth 2.0 Multiple Response Type Encoding Practices,” June 2013.) [OAuth.Responses]. In particular, error parameters are returned in the fragment component of the redirection URI.
TOC |
This section describes how to perform authentication using the Hybrid Flow. When using the Hybrid Flow, some tokens are returned from the Authorization Endpoint and others are returned from the Token Endpoint. The mechanisms for returning tokens in the Hybrid Flow are specified in OAuth 2.0 Multiple Response Type Encoding Practices (de Medeiros, B., Ed., Scurtescu, M., and P. Tarjan, “OAuth 2.0 Multiple Response Type Encoding Practices,” June 2013.) [OAuth.Responses].
TOC |
The Hybrid Flow follows the following steps:
TOC |
When using the Hybrid Flow, the Authorization Endpoint is used in the same manner as for the Authorization Code Flow, as defined in Section 2.1.2 (Authorization Endpoint), with the exception of the differences specified in this section.
TOC |
When using the Hybrid Flow, Authorization Requests are made in the same manner as for the Authorization Code Flow, as defined in Section 2.1.2.1 (Authorization Request), with the exception of the differences specified in this section.
The following is a non-normative example request using the Hybrid Flow (with line wraps within values for display purposes only):
GET /authorize? response_type=code%20id_token &client_id=s6BhdRkqt3 &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb &scope=openid%20profile%20email &nonce=n-0S6_WzA2Mj &state=af0ifjsldkj HTTP/1.1 Host: server.example.com
TOC |
When using the Hybrid Flow, the same Authorization Request parameters are used as for the Implicit Flow, as defined in Section 2.2.2.1.1 (Authorization Request Parameters), with the exception of the differences specified in this section.
- response_type
- REQUIRED. OAuth 2.0 registered response type value that determines how the Authorization Response is returned to the Client. When using the Hybrid Flow, this value MUST be code id_token, code token, or code id_token token. The meanings of these values are defined in OAuth 2.0 Multiple Response Type Encoding Practices (de Medeiros, B., Ed., Scurtescu, M., and P. Tarjan, “OAuth 2.0 Multiple Response Type Encoding Practices,” June 2013.) [OAuth.Responses]. No Access Token is returned when the value is id_token.
TOC |
When using the Hybrid Flow, the Authorization Request is validated in the same manner as for the Authorization Code Flow, as defined in Section 2.1.2.2 (Authorization Request Validation).
TOC |
When using the Hybrid Flow, End-User Authentication is performed in the same manner as for the Authorization Code Flow, as defined in Section 2.1.2.3 (Authorization Server Authenticates End-User).
TOC |
When using the Hybrid Flow, End-User Consent is obtained in the same manner as for the Authorization Code Flow, as defined in Section 2.1.2.4 (Authorization Server Obtains End-User Consent/Authorization).
TOC |
When using the Hybrid Flow, Authorization Responses are made in the same manner as for the Implicit Flow, as defined in Section 2.2.2.5 (Authorization Response), with the exception of the differences specified in this section.
- access_token
- Access Token for the UserInfo Endpoint. This is returned when the response_type value used is code token, or code id_token token. (A token_type value is also returned in the same cases.)
- id_token
- ID Token. This is returned when the response_type value used is code id_token or code id_token token.
The following is a non-normative example of a successful response using the Hybrid Flow (with line wraps for the display purposes only):
HTTP/1.1 302 Found Location: https://client.example.org/cb# code=SplxlOBeZQQYbYS6WxSbIA &id_token=eyJ0 ... NiJ9.eyJ1c ... I6IjIifX0.DeWt4Qu ... ZXso &state=af0ifjsldkj
TOC |
When using the Hybrid Flow, Redirect URI handling is done in the same manner as for the Implicit Flow, as defined in Section 2.2.2.5.1 (Redirect URI Handling), with the exception of the differences specified in this section.
TOC |
When using the Hybrid Flow, the Client MUST validate the response as follows:
TOC |
When using the Hybrid Flow, Access Tokens returned from the Authorization Endpoint are validated in the same manner as for the Implicit Flow, as defined in Section 2.2.2.7 (Access Token Validation).
TOC |
To validate an Authorization Code issued from the Authorization Endpoint with an ID Token, the Client SHOULD do the following:
TOC |
When using the Hybrid Flow, the contents of the ID Token returned from the Authorization Endpoint are the same as for the Implicit Flow, as defined in Section 2.2.2.8 (ID Token), with the exception of the differences specified in this section.
The requirements for using the following Claims are as follows when using the Hybrid Flow:
- nonce
- REQUIRED. String value used to associate a Client session with an ID Token, and to mitigate replay attacks. The value is passed through unmodified from the Authorization Request to the ID Token. Clients MUST verify that the nonce Claim Value is equal to the value of the nonce parameter sent in the Authorization Request. Authorization Servers MUST include a nonce Claim in the ID Token with the Claim Value being the nonce value sent in the Authorization Request. Use of the nonce is REQUIRED when using the Hybrid Flow. The nonce value is a case sensitive string.
- at_hash
- OPTIONAL or REQUIRED. Access Token hash value. Its value is the base64url encoding of the left-most half of the hash of the octets of the ASCII representation of the access_token value, where the hash algorithm used is the hash algorithm used in the alg parameter of the ID Token's JWS (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.) [JWS] header. For instance, if the alg is RS256, hash the access_token value with SHA-256, then take the left-most 128 bits and base64url encode them. The at_hash value is a case sensitive string.
- If the ID Token is issued from the Authorization Endpoint with an access_token, which is the case with the response_type value code id_token token, this is REQUIRED.
- c_hash
- OPTIONAL or REQUIRED. Code hash value. Its value is the base64url encoding of the left-most half of the hash of the octets of the ASCII representation of the code value, where the hash algorithm used is the hash algorithm used in the alg parameter of the ID Token's JWS (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.) [JWS] header. For instance, if the alg is HS512, hash the code value with SHA-512, then take the left-most 256 bits and base64url encode them. The c_hash value is a case sensitive string.
- If the ID Token is issued from the Authorization Endpoint with a code, which is the case with the response_type values code id_token and code id_token token, this is REQUIRED.
TOC |
When using the Hybrid Flow, the contents of the ID Token returned from the Authorization Endpoint MUST be validated in the same manner as for the Implicit Flow, as defined in Section 2.2.2.9 (ID Token Validation).
TOC |
When using the Hybrid Flow, Authorization Error Responses are made in the same manner as for the Authorization Code Flow, as defined in Section 2.1.2.7 (Authorization Error Response), with the exception of the differences specified in this section.
If the End-User denies the request or the End-User authentication fails, the Authorization Server MUST return the error Authorization Response as defined in 4.2.2.1 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749] and OAuth 2.0 Multiple Response Type Encoding Practices (de Medeiros, B., Ed., Scurtescu, M., and P. Tarjan, “OAuth 2.0 Multiple Response Type Encoding Practices,” June 2013.) [OAuth.Responses]. In particular, error parameters are returned in the fragment component of the redirection URI.
TOC |
When using the Hybrid Flow, the Token Endpoint is used in the same manner as for the Authorization Code Flow, as defined in Section 2.1.3 (Token Endpoint), with the exception of the differences specified in this section.
TOC |
When using the Hybrid Flow, Token Requests are made in the same manner as for the Authorization Code Flow, as defined in Section 2.1.3.1 (Token Request).
TOC |
When using the Hybrid Flow, Token Requests are validated in the same manner as for the Authorization Code Flow, as defined in Section 2.1.3.2 (Token Request Validation).
TOC |
When using the Hybrid Flow, Token Responses are made in the same manner as for the Authorization Code Flow, as defined in Section 2.1.3.3 (Token Response).
TOC |
When using the Hybrid Flow, Token Responses are validated in the same manner as for the Authorization Code Flow, as defined in Section 2.1.3.4 (Token Response Validation).
TOC |
When using the Hybrid Flow, the contents of the ID Token returned from the Token Endpoint are the same as for the ID Token returned from the Authorization Endpoint, as defined in Section 2.3.2.9 (ID Token), with the exception of the differences specified in this section.
If an ID Token is returned from both the Authorization Endpoint and from the Token Endpoint, which is the case with the response_type values code id_token and code id_token token, it is RECOMMENDED that their values be the same. However, it is acceptable for at_hash and c_hash values that may have been present in the ID Token returned from the Authorization Endpoint to be omitted from the ID Token returned from the Token Endpoint. At a minimum, the iss and sub Claim values MUST be the identical. Furthermore, any other Claims about the subject that are present in both ID Tokens SHOULD have the same values in both.
TOC |
When using the Hybrid Flow, the contents of the ID Token returned from the Token Endpoint MUST be validated in the same manner as for the Authorization Code Flow, as defined in Section 2.1.3.6 (ID Token Validation).
TOC |
If an Access Token is returned from both the Authorization Endpoint and from the Token Endpoint, which is the case with the response_type values code token and code id_token token, it is RECOMMENDED that their values be the same.
TOC |
When using the Hybrid Code Flow, the Access Token returned from the Token Endpoint is validated in the same manner as for the Authorization Code Flow, as defined in Section 2.1.3.7 (Access Token Validation).
TOC |
When using the Hybrid Flow, Token Error Responses are made in the same manner as for the Authorization Code Flow, as defined in Section 2.1.3.8 (Token Error Response).
TOC |
In some cases, the login flow can start at the Authorization Server or another party by contacting the Client via a stored link. The target resource at the Client can be a deep link, rather than a default landing page.
The Client MAY optionally register (Sakimura, N., Bradley, J., and M. Jones, “OpenID Connect Dynamic Client Registration 1.0,” July 2013.) [OpenID.Registration] an initiate_login_uri that can be used by the Authorization Server or another party to initiate a login for an End-User at the Client.
The Authorization Server or a third party sends a Login Initiation Request to the Client Initiation URI with the following parameters:
- login_hint
- OPTIONAL. Hint to the Authorization Server about the login identifier the End-User might use to log in. If the client receives a value for this string-valued parameter, it MUST include it in the subsequent authorization request as the login_hint parameter value.
- iss
- REQUIRED. Issuer Identifier for the Issuer that the Client is to send the Authentication Request to. Its value MUST be a URL using the https scheme.
- target_link_uri
- OPTIONAL. URI that the Client is requested to redirect to after authentication. Clients MUST verify the value of the target_link_uri to prevent being used as an open redirector to external sites.
Other parameters MAY be sent, if defined by extensions. Any parameters used that are not understood MUST be ignored by the Client.
Clients SHOULD employ frame busting and other techniques to prevent End-Users from being logged in by third party sites without their knowledge.
TOC |
This section specifies how the Client can obtain Claims about the End-User and defines a standard set of basic profile Claims.
TOC |
OpenID Connect Clients use scope values as defined in Section 3.3 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749] to specify what access privileges are being requested for Access Tokens. The scopes associated with Access Tokens determine what resources will be available when they are used to access OAuth 2.0 protected endpoints. Protected Resource endpoints MAY perform different actions and return different information based on the scope values and other parameters used when requesting the presented Access Token.
For OpenID Connect, scopes can be used to request that specific sets of information be made available as Claim Values. This specification describes only the scope values used by OpenID Connect.
OpenID Connect allows additional scope values to be defined and used. Scope values used that are not understood by an implementation SHOULD be ignored.
Claims requested by the following scopes are treated by Authorization Servers as Voluntary Claims.
OpenID Connect defines the following scope values:
- openid
- REQUIRED. Informs the Authorization Server that the Client is making an OpenID Connect request. If the openid scope value is not present, the behavior is entirely unspecified.
- profile
- OPTIONAL. This scope value requests access to the End-User's default profile Claims, which are: name, family_name, given_name, middle_name, nickname, preferred_username, profile, picture, website, gender, birthdate, zoneinfo, locale, and updated_at.
- OPTIONAL. This scope value requests access to the email and email_verified Claims.
- address
- OPTIONAL. This scope value requests access to the address Claim.
- phone
- OPTIONAL. This scope value requests access to the phone_number and phone_number_verified Claims.
Multiple scope values MAY be used by creating a space delimited, case sensitive list of ASCII scope values.
The Claims requested by the profile, email, address, and phone scope values are returned from the UserInfo Endpoint, as described in Section 4.3.2 (UserInfo Response), when a response_type value is used that results in an Access Token being issued. However, when the response_type value used is id_token (which issues no Access Token), the resulting Claims are returned in the ID Token.
In some cases, the End-User will be given the option to have the OpenID Provider decline to provide some or all information requested by Clients. To minimize the amount of information that the End-User is being asked to disclose, a Client can elect to only request a subset of the information available from the UserInfo Endpoint.
The following is a non-normative example of a scope Request:
scope=openid profile email phone
TOC |
This specification defines a set of standard Claims. They can be requested to be returned either in the UserInfo Response or in the ID Token.
Member | Type | Description |
---|---|---|
sub | string | Subject - Identifier for the End-User at the Issuer. |
name | string | End-User's full name in displayable form including all name parts, possibly including titles and suffixes, ordered according to the End-User's locale and preferences. |
given_name | string | Given name(s) or first name(s) of the End-User. Note that in some cultures, people can have multiple given names; all can be present, with the names being separated by space characters. |
family_name | string | Surname(s) or last name(s) of the End-User. Note that in some cultures, people can have multiple family names or no family name; all can be present, with the names being separated by space characters. |
middle_name | string | Middle name(s) of the End-User. Note that in some cultures, people can have multiple middle names; all can be present, with the names being separated by space characters. Also note that in some cultures, middle names are not used. |
nickname | string | Casual name of the End-User that may or may not be the same as the given_name. For instance, a nickname value of Mike might be returned alongside a given_name value of Michael. |
preferred_username | string | Shorthand name that the End-User wishes to be referred to at the RP, such as janedoe or j.doe. This value MAY be any valid JSON string including special characters such as @, /, or whitespace. This value MUST NOT be relied upon to be unique by the RP. (See Section 4.2.3 (Claim Stability and Uniqueness).) |
profile | string | URL of the End-User's profile page. The contents of this Web page SHOULD be about the End-User. |
picture | string | URL of the End-User's profile picture. This URL MUST refer to an image file (for example, a PNG, JPEG, or GIF image file), rather than to a Web page containing an image. Note that this URL SHOULD specifically reference a profile photo of the End-User suitable for displaying when describing the End-User, rather than an arbitrary photo taken by the End-User. |
website | string | URL of the End-User's Web page or blog. This Web page SHOULD contain information published by the End-User or an organization that the End-User is affiliated with. |
string | End-User's preferred e-mail address. Its value MUST conform to the RFC 5322 (Resnick, P., Ed., “Internet Message Format,” October 2008.) [RFC5322] addr-spec syntax. This value MUST NOT be relied upon to be unique by the RP, as discussed in Section 4.2.3 (Claim Stability and Uniqueness). | |
email_verified | boolean | True if the End-User's e-mail address has been verified; otherwise false. When this Claim Value is true, this means that the OP took affirmative steps to ensure that this e-mail address was controlled by the End-User at the time the verification was performed. The means by which an e-mail address is verified is context-specific, and dependent upon the trust framework or contractual agreements within which the parties are operating. |
gender | string | End-User's gender. Values defined by this specification are female and male. Other values MAY be used when neither of the defined values are applicable. |
birthdate | string | End-User's birthday, represented as an ISO 8601:2004 (International Organization for Standardization, “ISO 8601:2004. Data elements and interchange formats - Information interchange - Representation of dates and times,” 2004.) [ISO8601‑2004] YYYY-MM-DD format. The year MAY be 0000, indicating that it is omitted. To represent only the year, YYYY format is allowed. Note that depending on the underlying platform's date related function, providing just year can result in varying month and day, so the implementers need to take this factor into account to correctly process the dates. |
zoneinfo | string | String from zoneinfo [zoneinfo] (Public Domain, “The tz database,” June 2011.) time zone database representing the End-User's time zone. For example, Europe/Paris or America/Los_Angeles. |
locale | string | End-User's locale, represented as a BCP47 (Phillips, A. and M. Davis, “Tags for Identifying Languages,” September 2009.) [RFC5646] language tag. This is typically an ISO 639-1 Alpha-2 (International Organization for Standardization, “ISO 639-1:2002. Codes for the representation of names of languages -- Part 1: Alpha-2 code,” 2002.) [ISO639‑1] language code in lowercase and an ISO 3166-1 Alpha-2 (International Organization for Standardization, “ISO 3166-1:1997. Codes for the representation of names of countries and their subdivisions -- Part 1: Country codes,” 1997.) [ISO3166‑1] country code in uppercase, separated by a dash. For example, en-US or fr-CA. As a compatibility note, some implementations have used an underscore as the separator rather than a dash, for example, en_US; Implementations MAY choose to accept this locale syntax as well. |
phone_number | string | End-User's preferred telephone number. E.164 (International Telecommunication Union, “E.164: The international public telecommunication numbering plan,” 2010.) [E.164] is RECOMMENDED as the format of this Claim, for example, +1 (425) 555-1212 or +56 (2) 687 2400. If the phone number contains an extension, it is RECOMMENDED that the extension be represented using the RFC 3966 (Schulzrinne, H., “The tel URI for Telephone Numbers,” December 2004.) [RFC3966] extension syntax, for example, +1 (604) 555-1234;ext=5678. |
phone_number_verified | boolean | True if the End-User's phone number has been verified; otherwise false. When this Claim Value is true, this means that the OP took affirmative steps to ensure that this phone number was controlled by the End-User at the time the verification was performed. The means by which a phone number is verified is context-specific, and dependent upon the trust framework or contractual agreements within which the parties are operating. When true, the phone_number Claim MUST be in E.164 format and any extensions MUST be represented in RFC 3966 format. |
address | JSON object | End-User's preferred address. The value of the address member is a JSON (Crockford, D., “The application/json Media Type for JavaScript Object Notation (JSON),” July 2006.) [RFC4627] structure containing some or all of the members defined in Section 4.2.1 (Address Claim). |
updated_at | number | Time the End-User's information was last updated. The time is represented as the number of seconds from 1970-01-01T0:0:0Z as measured in UTC until the date/time. |
Table 1: Reserved Member Definitions |
For privacy reasons, OpenID Providers MAY elect to not return values for some requested Claims.
The sub (subject) Claim in the UserInfo Endpoint response MUST exactly match the sub Claim in the ID Token, before using additional UserInfo Endpoint Claims.
The UserInfo Endpoint MUST return Claims in JSON format unless a different format was specified during Registration [OpenID.Registration] (Sakimura, N., Bradley, J., and M. Jones, “OpenID Connect Dynamic Client Registration 1.0,” July 2013.). The UserInfo Endpoint MAY return Claims in JWT format, which can be signed and/or encrypted. The UserInfo Endpoint MUST return a content-type header to indicate which format is being returned. The following are accepted content types:
Content-Type | Format Returned |
---|---|
application/json | plain text JSON object |
application/jwt | JSON Web Token (JWT) |
The following is a non-normative example of a UserInfo Response body:
{ "sub": "248289761001", "name": "Jane Doe", "given_name": "Jane", "family_name": "Doe", "preferred_username": "j.doe", "email": "janedoe@example.com", "picture": "http://example.com/janedoe/me.jpg" }
TOC |
The Address Claim represents a physical mailing address. Implementations MAY return only a subset of the fields of an address, depending upon the information available and the End-User's privacy preferences. For example, the country and region might be returned without returning more fine-grained address information.
Implementations MAY return just the full address as a single string in the formatted sub-field, or they MAY return just the individual component fields using the other sub-fields, or they MAY return both. If both variants are returned, they SHOULD be describing the same address, with the formatted address indicating how the component fields are combined.
- formatted
- Full mailing address, formatted for display or use on a mailing label. This field MAY contain multiple lines, separated by newline characters.
- street_address
- Full street address component, which MAY include house number, street name, Post Office Box, and multi-line extended street address information. This field MAY contain multiple lines, separated by newline characters.
- locality
- City or locality component.
- region
- State, province, prefecture or region component.
- postal_code
- Zip code or postal code component.
- country
- Country name component.
TOC |
Human-readable Claim Values and Claim Values that reference human-readable values MAY be represented in multiple languages and scripts. To specify the languages and scripts, BCP47 (Phillips, A. and M. Davis, “Tags for Identifying Languages,” September 2009.) [RFC5646] language tags are added to member names, delimited by a # character. For example, family_name#ja-Kana-JP expresses the Family Name in Katakana in Japanese, which is commonly used to index and represent the phonetics of the Kanji representation of the same represented as family_name#ja-Hani-JP. As another example, both website and website#de Claim Values might be returned, referencing a Web site in an unspecified language and a Web site in German.
Since Claim Names are case sensitive, it is strongly RECOMMENDED that language tag values used in Claim Names be spelled using the character case with which they are registered in the IANA Language Subtag Registry (Internet Assigned Numbers Authority (IANA), “Language Subtag Registry,” 2005.) [IANA.Language]. In particular, normally language names are spelled with lowercase characters, region names are spelled with uppercase characters, and scripts are spelled with mixed case characters. However, since BCP47 language tag values are case insensitive, implementations SHOULD interpret the language tag values supplied in a case insensitive manner.
Per the recommendations in BCP47, language tag values for Claims SHOULD only be as specific as necessary. For instance, using fr might be sufficient in many contexts, rather than fr-CA or fr-FR. Where possible, OPs SHOULD try to match requested Claim locales with Claims it has. For instance, if the Client asks for a Claim with a de (German) language tag and the OP has a value tagged with de-CH (Swiss German) and no generic German value, it would be appropriate for the OP to return the Swiss German value to the Client. (This intentionally moves as much of the complexity of language tag matching to the OP as possible, to simplify Clients.)
A claims_locales request can be used to specify the preferred languages and scripts to use for the returned Claims. Section 4.5.2 (Languages and Scripts for Individual Claims) describes how to request that specific Claims use particular languages and scripts.
When the OP determines, either through the claims_locales parameter, or by other means, that the End-User and Client are requesting Claims in only one set of languages and scripts, it is RECOMMENDED that OPs return Claims without language tags when they employ this language and script. It is also RECOMMENDED that Clients be written in a manner that they can handle and utilize Claims using language tags.
TOC |
The sub (subject) and iss (issuer) Claims are the only Claims that a Client can rely upon as a stable identifier for the End-User, since the sub Claim MUST be locally unique and never reassigned within the Issuer for a particular End-User, as described in Section 2.1.3.5 (ID Token). Therefore, the only guaranteed unique identifier for a given End-User is the combination of the iss Claim and the sub Claim.
All other Claims carry no such guarantees across different issuers in terms of stability over time or uniqueness across users, and Issuers are permitted to apply local restrictions and policies. For instance, an Issuer MAY re-use an email Claim value across different End-Users at different points in time, and the claimed email address for a given End-User MAY change over time. Therefore, other Claims such as email, phone_number, and preferred_username and MUST NOT be used as unique identifiers for the End-User.
TOC |
While this specification defines only small set of Claims as standard Claims, other Claims MAY be used in conjunction with the standard Claims. When using such Claims, it is RECOMMENDED that collision resistant names be used for the Claim Names, as described in Section 4.2 (Public Claim Names) of the JSON Web Token (JWT) (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.) [JWT] specification. Alternatively, Private Claim Names can be safely used when naming conflicts are unlikely to arise, as described in 4.3 of the JWT specification. Or, if specific additional Claims will have broad and general applicability, they can be registered with Reserved Claim Names, per Sections 4.1 and 9.1 of the JWT specification.
TOC |
The UserInfo Endpoint is an OAuth 2.0 Protected Resource that returns Claims about the authenticated End-User. To obtain the requested Claims about the End-User, the Client makes a GET or POST request to the UserInfo Endpoint. These Claims are represented by a JSON object that contains a collection of name and value pairs for the Claims.
Communication with the UserInfo Endpoint MUST utilize TLS. See Section 15.17 (TLS Requirements) for more information on using TLS.
The UserInfo Endpoint MUST support the use of the HTTP GET and HTTP POST methods defined in RFC 2616 (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.) [RFC2616] at the UserInfo Endpoint.
The UserInfo Endpoint MUST accept Access Tokens as OAuth 2.0 Bearer Token Usage (Jones, M. and D. Hardt, “The OAuth 2.0 Authorization Framework: Bearer Token Usage,” October 2012.) [RFC6750].
The UserInfo Endpoint SHOULD support the use of Cross Origin Resource Sharing (CORS) (Opera Software ASA, “Cross-Origin Resource Sharing,” July 2010.) [CORS] and or other methods as appropriate to enable Java Script Clients to access the endpoint.
TOC |
Clients send requests with the following parameters to the UserInfo Endpoint to obtain Claims about the End-User:
- access_token
- REQUIRED. Access Token obtained from an OpenID Connect Authorization Server.
The Client sends the UserInfo Request using either HTTPS GET or HTTPS POST. It is RECOMMENDED that the Client use the Authorization header field method for all requests and that they use the GET method.
The Access Token obtained from an OpenID Connect Authorization Request MUST be sent as a Bearer Token. Section 2 of the OAuth 2.0 Bearer Token Usage (Jones, M. and D. Hardt, “The OAuth 2.0 Authorization Framework: Bearer Token Usage,” October 2012.) [RFC6750] specification documents the permissible methods of sending the Access Token.
The following is a non-normative example of a UserInfo request:
GET /userinfo HTTP/1.1 Host: server.example.com Authorization: Bearer SlAV32hkKG
TOC |
The UserInfo Claims MUST be returned as the members of a JSON object unless a signed or encrypted response was requested during Client Registration. The Claims defined in Section 4.2 (Standard Claims) can be returned, as can additional Claims not specified there.
If a Claim is not returned, that Claim Name SHOULD be omitted from the JSON object representing the Claims; it SHOULD NOT be present with a null or empty string value.
The sub (subject) Claim MUST always be returned in the UserInfo Response.
NOTE: The UserInfo Endpoint response is not guaranteed to be about the End-User identified by the sub (subject) element of the ID Token. The sub Claim in the UserInfo Endpoint response MUST be verified to exactly match the sub Claim in the ID Token before using additional UserInfo Endpoint Claims.
Upon receipt of the UserInfo request, the UserInfo Endpoint MUST return the JSON Serialization of the UserInfo response as in Section 12.3 (JSON Serialization) in the HTTP response body unless a different format was specified during Registration [OpenID.Registration] (Sakimura, N., Bradley, J., and M. Jones, “OpenID Connect Dynamic Client Registration 1.0,” July 2013.). The content-type of the HTTP response MUST be set to application/json if the response body is a text JSON structure; the response body SHOULD be encoded using UTF-8. If the JSON response is signed or encrypted, then the content-type MUST be set to application/jwt.
The following is a non-normative example of a UserInfo Response:
HTTP/1.1 200 OK Content-Type: application/json { "sub": "248289761001", "name": "Jane Doe", "given_name": "Jane", "family_name": "Doe", "email": "janedoe@example.com", "picture": "http://example.com/janedoe/me.jpg" }
TOC |
The Client MUST validate the UserInfo Response as follows:
TOC |
When an error condition occurs, the UserInfo Endpoint returns an Error Response as defined in Section 3 of OAuth 2.0 Bearer Token Usage (Jones, M. and D. Hardt, “The OAuth 2.0 Authorization Framework: Bearer Token Usage,” October 2012.) [RFC6750].
The following is a non-normative example of a UserInfo Error Response:
HTTP/1.1 401 Unauthorized WWW-Authenticate: Bearer realm="example.com", error="invalid_token", error_description="The Access Token expired"
TOC |
OpenID Connect defines the following Authorization Request parameter to enable requesting that Claims be returned for specific locales:
- claims_locales
- OPTIONAL. End-User's preferred languages and scripts for Claims being returned, represented as a space-separated list of BCP47 (Phillips, A. and M. Davis, “Tags for Identifying Languages,” September 2009.) [RFC5646] language tag values, ordered by preference. An error SHOULD NOT result if some or all of the requested locales are not supported by the OpenID Provider.
TOC |
OpenID Connect defines the following Authorization Request parameter to enable requesting individual Claims and specifying parameters that apply to the requested Claims:
- claims
- OPTIONAL. This parameter is used to request that specific Claims be returned. The value is a JSON object listing the requested Claims, as specified in Section 4.5 (Requesting Claims using the "claims" Request Parameter).
The claims Authorization Request parameter requests that specific Claims be returned from the UserInfo Endpoint and/or in the ID Token. It is represented as a JSON object containing lists of Claims being requested from these locations. Properties of the Claims being requested MAY also be specified.
Support for the claims parameter is OPTIONAL. Should an OP not support this parameter and an RP uses it, the OP SHOULD return a set of Claims to the RP that it believes would be useful to the RP and the End-User using whatever heuristics it believes are appropriate. The claims_parameter_supported Discovery result indicates whether the OP supports this parameter.
The claims parameter value is represented in an OAuth 2.0 request as UTF-8 encoded JSON (which ends up being form-urlencoded when passed as an OAuth parameter). When used in a Request Object value, per Section 5.1 (Passing a Request Object by Value), the JSON is used as the value of the claims member.
The top-level members of the Claims request JSON object are:
- userinfo
- OPTIONAL. Requests that the listed individual Claims be returned from the UserInfo Endpoint. If present, the listed Claims are being requested to be added to any Claims that are being requested using scope values. If not present, the Claims being requested from the UserInfo Endpoint are only those requested using scope values.
- When the userinfo member is used, the request MUST also use a response_type value that results in an Access Token being issued to use at the UserInfo Endpoint.
- id_token
- OPTIONAL. Requests that the listed individual Claims be returned in the ID Token. If present, the listed Claims are being requested to be added to the default Claims in the ID Token. If not present, the default ID Token Claims are requested.
Other members MAY be present. Any members used that are not understood MUST be ignored.
An example Claims request is as follows:
{ "userinfo": { "given_name": {"essential": true}, "nickname": null, "email": {"essential": true}, "email_verified": {"essential": true}, "picture": null, "http://example.info/claims/groups": null }, "id_token": { "auth_time": {"essential": true}, "acr": {"values": ["urn:mace:incommon:iap:silver"] } } }
TOC |
The userinfo and id_token members of the claims request both are JSON objects with the names of the individual Claims being requested as the member names. The member values MUST be one of the following:
- null
- Indicates that this Claim is being requested in the default manner. In particular, this is a Voluntary Claim. For instance, the Claim request:
requests the given_name Claim in the default manner."given_name": null- JSON Object
- Used to provide additional information about the Claim being requested. This specification defines the following members:
Other members MAY be defined to provide additional information about the requested Claims. Any members used that are not understood MUST be ignored.
- essential
- OPTIONAL. Indicates whether the Claim being requested is an Essential Claim. If the value is true, this indicates that the Claim is an Essential Claim. For instance, the Claim request:
can be used to specify that it is Essential to return an auth_time Claim Value."auth_time": {"essential": true}- If the value is false, it indicates that it is a Voluntary Claim. The default is false.
- By requesting Claims as Essential Claims the Client indicates to the End-User that releasing these Claims will ensure a smooth authorization for the specific task requested by the End-User. Note that even if the Claims are not available because the End-User did not authorize their release or they are not present, the Authorization Server MUST NOT generate an error when Claims are not returned, whether they are Essential or Voluntary.
- value
- OPTIONAL. Requests that the Claim be returned with a particular value. For instance the Claim request:
can be used to specify that the request apply to the End-User with subject identifier 248289761001."sub": {"value": "248289761001"}- The value of the value member MUST be a valid value for the Claim being requested. Definitions of individual Claims can include requirements on how and whether the value qualifier is to be used when requesting that Claim.
- values
- OPTIONAL. Requests that the Claim be returned with one of a set of values, with the values appearing in order of preference. For instance the Claim request:
specifies that it is Essential that the acr Claim be returned with either the value urn:mace:incommon:iap:silver or urn:mace:incommon:iap:bronze."acr": {"essential": true, "values": ["urn:mace:incommon:iap:silver", "urn:mace:incommon:iap:bronze"]}- The values in the values member array MUST be valid values for the Claim being requested. Definitions of individual Claims can include requirements on how and whether the values qualifier is to be used when requesting that Claim.
Note that when the claims request parameter is supported, the scope values that request Claims, as defined in Section 4.1 (Requesting Claims using Scope Values), are effectively shorthand methods for requesting sets of individual Claims. For example, using the scope value openid email and a response_type that returns an Access Token is equivalent to using the scope value openid and the following request for individual Claims.
Equivalent of using the email scope value:
{ "userinfo": { "email": null, "email_verified": null } }
TOC |
As described in Section 4.2.2 (Claims Languages and Scripts), human-readable Claims values and Claim Values that reference human-readable values MAY be represented in multiple languages and scripts. Within a request for individual Claims, requested languages and scripts for particular Claims MAY be requested by including Claim Names that contain #-separated BCP47 (Phillips, A. and M. Davis, “Tags for Identifying Languages,” September 2009.) [RFC5646] language tags in the Claims request, using the Claim Name syntax specified in Section 4.2.2 (Claims Languages and Scripts). For example, a Family Name in Katakana in Japanese can be requested using the Claim Name family_name#ja-Kana-JP and a Kanji representation of the Family Name in Japanese can be requested using the Claim Name family_name#ja-Hani-JP. A German-language Web site can be requested with the Claim Name website#de.
If an OP receives a request for human-readable Claims in a language and script that it doesn't have, any versions of those Claims returned that don't use the requested language and script SHOULD use a language tag in the Claim Name.
TOC |
The UserInfo Endpoint MAY return the following three types of Claims:
- Normal Claims
- Claims that are directly asserted by the OpenID Provider.
- Aggregated Claims
- Claims that are asserted by a Claims Provider other than the OpenID Provider but are returned by OpenID Provider.
- Distributed Claims
- Claims that are asserted by a Claims Provider other than the OpenID Provider but are returned as references by the OpenID Provider.
The UserInfo Endpoint MUST support Normal Claims.
Aggregated and Distributed Claims support is OPTIONAL.
TOC |
Normal Claims are represented as members in a JSON object. The Claim Name is the member name and the Claim Value is the member value.
The following is a non-normative response containing Normal Claims:
{ "name": "Jane Doe", "given_name": "Jane", "family_name": "Doe", "email": "janedoe@example.com", "picture": "http://example.com/janedoe/me.jpg" }
TOC |
Aggregated and distributed Claims are represented by using special _claim_names and _claim_sources members of the JSON object containing the Claims.
- _claim_names
- JSON object whose member names are the Claim Names for the Aggregated and Distributed Claims. The member values are references to the member names in the _claim_sources member from which the actual Claim Values can be retrieved.
- _claim_sources
- JSON object whose member names are referenced by the member values of the _claim_names member. The member values contain sets of Aggregated Claims or reference locations for Distributed Claims. The member values can have one of the following formats depending on whether it is providing Aggregated or Distributed Claims:
- Aggregated Claims
- JSON object that MUST contain the JWT member whose value is a JWT (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.) [JWT] that MUST contain all the Claims in the _claim_names object that references the corresponding _claim_sources member. Other members MAY be present. Any members used that are not understood MUST be ignored.
- JWT
- REQUIRED. JWT containing Claim Values.
- The JWT SHOULD NOT contain a sub (subject) Claim unless its value is an identifier for the End-User at the Claims Provider (and not for the OpenID Provider or another party); this typically means that a sub Claim SHOULD NOT be provided.
- Distributed Claims
- JSON object that contains the following members and values:
- endpoint
- REQUIRED. OAuth 2.0 resource endpoint from which the associated Claim can be retrieved. The endpoint URL MUST return the Claim as a JWT.
- access_token
- OPTIONAL. Access Token enabling retrieval of the Claims from the endpoint URL by using the OAuth 2.0 Bearer Token Usage (Jones, M. and D. Hardt, “The OAuth 2.0 Authorization Framework: Bearer Token Usage,” October 2012.) [RFC6750] protocol. Claims SHOULD be requested using the Authorization Request header field and Claims Providers MUST support this method. If the Access Token is not available, Clients MAY need to retrieve the Access Token out of band or use an a priori Access Token that was negotiated between the Claims Provider and Client, or the Claims Provider MAY reauthenticate the End-User and/or reauthorize the Client.
- A sub (subject) Claim SHOULD NOT be returned from the Claims Provider unless its value is an identifier for the End-User at the Claims Provider (and not for the OpenID Provider or another party); this typically means that a sub Claim SHOULD NOT be provided.
TOC |
In this non-normative example, Claims from Claims Provider A are combined with other Claims held by the OpenID provider, with the Claims from Claims Provider A being returned as Aggregated Claims.
In this example, these Claims about Jane Doe have been issued by Claims Provider A:
{ "address": { "street_address": "1234 Hollywood Blvd.", "locality": "Los Angeles", "region": "CA", "postal_code": "90210", "country": "US"}, "phone_number": "+1 (310) 123-4567" }
Claims Provider A signs the JSON Claims, representing them in a signed JWT: jwt_header.jwt_part2.jwt_part3. It is this JWT that is used by the OpenID Provider.
In this example, this JWT containing Jane Doe's Aggregated Claims from Claims Provider A is combined with other Normal Claims, and returned as the following set of Claims:
{ "name": "Jane Doe", "given_name": "Jane", "family_name": "Doe", "birthdate": "0000-03-22", "eye_color": "blue", "email": "janedoe@example.com", "_claim_names": { "address": "src1", "phone_number": "src1" }, "_claim_sources": { "src1": {"JWT": "jwt_header.jwt_part2.jwt_part3"} } }
TOC |
In this non-normative example, the OpenID Provider combines Normal Claims that it holds with references to Claims held by two different Claims Providers, B and C, incorporating references to some of the Claims held by B and C as Distributed Claims.
In this example, these Claims about Jane Doe are held by Claims Provider B (Jane Doe's bank):
{ "shipping_address": { "street_address": "1234 Hollywood Blvd.", "locality": "Los Angeles", "region": "CA", "postal_code": "90210", "country": "US"}, "payment_info": "Some_Card 1234 5678 9012 3456", "phone_number": "+1 (310) 123-4567" }
Also in this example, this Claim about Jane Doe is held by Claims Provider C (a credit agency):
{ "credit_score": 650 }
The OpenID Provider returns Jane Doe's Claims along with references to the Distributed Claims from Claims Provider B and Claims Provider C by sending the Access Tokens and URLs of locations from which the Distributed Claims can be retrieved:
{ "name": "Jane Doe", "given_name": "Jane", "family_name": "Doe", "email": "janedoe@example.com", "birthdate": "0000-03-22", "eye_color": "blue", "_claim_names": { "payment_info": "src1", "shipping_address": "src1", "credit_score": "src2" }, "_claim_sources": { "src1": {"endpoint": "https://bank.example.com/claim_source"}, "src2": {"endpoint": "https://creditagency.example.com/claims_here", "access_token": "ksj3n283dke"} } }
TOC |
OpenID Connect defines the following Authorization Request parameters to enable Authentication Requests to be signed and optionally encrypted:
- request
- OPTIONAL. This parameter enables OpenID Connect requests to be passed in a single, self-contained parameter and to be signed and optionally encrypted. The parameter value is a Request Object value, as specified in Section 5.1 (Passing a Request Object by Value). It represents the request as a JWT whose Claims are the request parameters above.
- request_uri
- OPTIONAL. This parameter enables OpenID Connect requests to be passed by reference, rather than by value. The request_uri value is a URL using the https scheme referencing a resource containing a Request Object value, which is a JWT containing the request parameters.
Requests using these parameters are represented as JWTs, which are respectively passed by value or by reference. The ability to pass requests by reference is particularly useful for large requests. If one of these parameters is used, the other MUST NOT be used in the same request.
TOC |
The request Authorization Request parameter enables OpenID Connect requests to be passed in a single, self-contained parameter and to be signed and optionally encrypted. It represents the request as a JWT whose Claims are the request parameters specified in Section 2.1.2.1.1 (Authorization Request Parameters). This JWT is called a Request Object.
Support for the request parameter is OPTIONAL. The request_parameter_supported Discovery result indicates whether the OP supports this parameter. Should an OP not support this parameter and an RP uses it, the OP MUST return the request_not_supported error.
When the request parameter is used, the OpenID Connect request parameter values contained in the JWT supersede those passed using the OAuth 2.0 request syntax. However, some parameters MAY be passed using the OAuth 2.0 request syntax even when a Request Object is used; this would typically be done to enable a cached, pre-signed (and possibly pre-encrypted) Request Object value to be used containing the fixed request parameters, while parameters that can vary with each request, such as state and nonce, are passed as OAuth 2.0 parameters.
Even if a scope parameter is present in the Request Object value, a scope parameter MUST always be passed using the OAuth 2.0 request syntax containing the openid scope value to indicate to the underlying OAuth 2.0 logic that this is an OpenID Connect request.
The Request Object MAY be signed or unsigned (plaintext). When it is plaintext, this is indicated by use of the none algorithm [JWA] (Jones, M., “JSON Web Algorithms (JWA),” May 2013.) in the JWS header. If signed, the Request Object SHOULD contain the Claims iss (issuer) and aud (audience) as members, with their semantics being as defined in the JWT (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.) [JWT] specification.
The Request Object MAY also be encrypted using JWE (Jones, M., Rescorla, E., and J. Hildebrand, “JSON Web Encryption (JWE),” May 2013.) [JWE], with nested signing and encryption performed as described in the JWT [JWT] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.) specification.
request and request_uri parameters MUST NOT be included in Request Objects.
The following is a non-normative example of the Claims in a Request Object before base64url encoding and signing:
{ "response_type": "code id_token", "client_id": "s6BhdRkqt3", "redirect_uri": "https://client.example.org/cb", "scope": "openid", "state": "af0ifjsldkj", "nonce": "n-0S6_WzA2Mj", "max_age": 86400, "claims": { "userinfo": { "given_name": {"essential": true}, "nickname": null, "email": {"essential": true}, "email_verified": {"essential": true}, "picture": null }, "id_token": { "gender": null, "birthdate": {"essential": true}, "acr": {"values": ["urn:mace:incommon:iap:silver"]} } } }
Signing it with the RS256 algorithm results in this Request Object value (with line wraps within values for display purposes only):
eyJhbGciOiJSUzI1NiJ9.ew0KICJyZXNwb25zZV90eXBlIjogImNvZGUgaWRfdG9rZW 4iLA0KICJjbGllbnRfaWQiOiAiczZCaGRSa3F0MyIsDQogInJlZGlyZWN0X3VyaSI6I CJodHRwczovL2NsaWVudC5leGFtcGxlLm9yZy9jYiIsDQogInNjb3BlIjogIm9wZW5p ZCIsDQogInN0YXRlIjogImFmMGlmanNsZGtqIiwNCiAibm9uY2UiOiAibi0wUzZfV3p BMk1qIiwNCiAibWF4X2FnZSI6IDg2NDAwLA0KICJjbGFpbXMiOiANCiAgew0KICAgIn VzZXJpbmZvIjogDQogICAgew0KICAgICAiZ2l2ZW5fbmFtZSI6IHsiZXNzZW50aWFsI jogdHJ1ZX0sDQogICAgICJuaWNrbmFtZSI6IG51bGwsDQogICAgICJlbWFpbCI6IHsi ZXNzZW50aWFsIjogdHJ1ZX0sDQogICAgICJlbWFpbF92ZXJpZmllZCI6IHsiZXNzZW5 0aWFsIjogdHJ1ZX0sDQogICAgICJwaWN0dXJlIjogbnVsbA0KICAgIH0sDQogICAiaW RfdG9rZW4iOiANCiAgICB7DQogICAgICJnZW5kZXIiOiBudWxsLA0KICAgICAiYmlyd GhkYXRlIjogeyJlc3NlbnRpYWwiOiB0cnVlfSwNCiAgICAgImFjciI6IHsidmFsdWVz IjogWyIyIl19DQogICAgfQ0KICB9DQp9.bOD4rUiQfzh4QPIs_f_R2GVBhNHcc1p2cQ TgixB1tsYRs52xW4TO74USgb-nii3RPsLdfoPlsEbJLmtbxG8-TQBHqGAyZxMDPWy3p hjeRt9ApDRnLQrjYuvsCj6byu9TVaKX9r1KDFGT-HLqUNlUTpYtCyM2B2rLkWM08ufB q9JBCEzzaLRzjevYEPMaoLAOjb8LPuYOYTBqshRMUxy4Z380-FJ2Lc7VSfSu6HcB2nL SjiKrrfI35xkRJsaSSmjasMYeDZarYCl7r4o17rFclk5KacYMYgAs-JYFkwab6Dd56Z rAzakHt9cExMpg04lQIux56C-Qk6dAsB6W6W91AQ
The following is the RSA public key in JWK format that can be used to validate the Request Object signature in this and subsequent Request Object examples (with line wraps within values for display purposes only):
{ "kty":"RSA", "n":"y9Lqv4fCp6Ei-u2-ZCKq83YvbFEk6JMs_pSj76eMkddWRuWX2aBKGHAtKlE5P 7_vn__PCKZWePt3vGkB6ePgzAFu08NmKemwE5bQI0e6kIChtt_6KzT5OaaXDF I6qCLJmk51Cc4VYFaxgqevMncYrzaW_50mZ1yGSFIQzLYP8bijAHGVjdEFgZa ZEN9lsn_GdWLaJpHrB3ROlS50E45wxrlg9xMncVb8qDPuXZarvghLL0HzOuYR adBJVoWZowDNTpKpk2RklZ7QaBO7XDv3uR7s_sf2g-bAjSYxYUGsqkNA9b3xV W53am_UZZ3tZbFTIh557JICWKHlWj5uzeJXaw", "e":"AQAB" }
TOC |
The Client sends the Authorization Request to the Authorization Endpoint.
The following is a non-normative example of an Authorization Request using the request parameter (with line wraps within values for display purposes only):
https://server.example.com/authorize? response_type=code%20id_token &client_id=s6BhdRkqt3 &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb &scope=openid &state=af0ifjsldkj &nonce=n-0S6_WzA2Mj &request=eyJhbGciOiJSUzI1NiJ9.ew0KICJyZXNwb25zZV90eXBlIjogImNvZG UgaWRfdG9rZW4iLA0KICJjbGllbnRfaWQiOiAiczZCaGRSa3F0MyIsDQogInJlZG lyZWN0X3VyaSI6ICJodHRwczovL2NsaWVudC5leGFtcGxlLm9yZy9jYiIsDQogIn Njb3BlIjogIm9wZW5pZCIsDQogInN0YXRlIjogImFmMGlmanNsZGtqIiwNCiAibm 9uY2UiOiAibi0wUzZfV3pBMk1qIiwNCiAibWF4X2FnZSI6IDg2NDAwLA0KICJjbG FpbXMiOiANCiAgew0KICAgInVzZXJpbmZvIjogDQogICAgew0KICAgICAiZ2l2ZW 5fbmFtZSI6IHsiZXNzZW50aWFsIjogdHJ1ZX0sDQogICAgICJuaWNrbmFtZSI6IG 51bGwsDQogICAgICJlbWFpbCI6IHsiZXNzZW50aWFsIjogdHJ1ZX0sDQogICAgIC JlbWFpbF92ZXJpZmllZCI6IHsiZXNzZW50aWFsIjogdHJ1ZX0sDQogICAgICJwaW N0dXJlIjogbnVsbA0KICAgIH0sDQogICAiaWRfdG9rZW4iOiANCiAgICB7DQogIC AgICJnZW5kZXIiOiBudWxsLA0KICAgICAiYmlydGhkYXRlIjogeyJlc3NlbnRpYW wiOiB0cnVlfSwNCiAgICAgImFjciI6IHsidmFsdWVzIjogWyIyIl19DQogICAgfQ 0KICB9DQp9.bOD4rUiQfzh4QPIs_f_R2GVBhNHcc1p2cQTgixB1tsYRs52xW4TO7 4USgb-nii3RPsLdfoPlsEbJLmtbxG8-TQBHqGAyZxMDPWy3phjeRt9ApDRnLQrjY uvsCj6byu9TVaKX9r1KDFGT-HLqUNlUTpYtCyM2B2rLkWM08ufBq9JBCEzzaLRzj evYEPMaoLAOjb8LPuYOYTBqshRMUxy4Z380-FJ2Lc7VSfSu6HcB2nLSjiKrrfI35 xkRJsaSSmjasMYeDZarYCl7r4o17rFclk5KacYMYgAs-JYFkwab6Dd56ZrAzakHt 9cExMpg04lQIux56C-Qk6dAsB6W6W91AQ
TOC |
The request_uri Authorization Request parameter enables OpenID Connect requests to be passed by reference, rather than by value. This parameter is used identically to the request parameter, other than that the Request Object value is retrieved from the resource at the specified URL, rather than passed by value.
The request_uri_parameter_supported Discovery result indicates whether the OP supports this parameter. Should an OP not support this parameter and an RP uses it, the OP MUST return the request_uri_not_supported error.
When the request_uri parameter is used, the OpenID Connect request parameter values contained in the referenced JWT supersede those passed using the OAuth 2.0 request syntax. However, some parameters MAY be passed using the OAuth 2.0 request syntax even when a request_uri is used; this would typically be done to enable a cached, pre-signed (and possibly pre-encrypted) Request Object value to be used containing the fixed request parameters, while parameters that can vary with each request, such as state and nonce, are passed as OAuth 2.0 parameters.
Even if a scope parameter is present in the referenced Request Object, a scope parameter MUST always be passed using the OAuth 2.0 request syntax containing the openid scope value to indicate to the underlying OAuth 2.0 logic that this is an OpenID Connect request.
Servers MAY cache the contents of the resources referenced by Request URIs. If the contents of the referenced resource could ever change, the URI SHOULD include the base64url encoded SHA-256 hash of the referenced resource contents as the fragment component of the URI. If the fragment value used for a URI changes, that signals the server that any cached value for that URI with the old fragment value is no longer valid.
Note that Clients MAY pre-register request_uri values using the request_uris parameter defined in Section 2 of the OpenID Connect Dynamic Client Registration 1.0 (Sakimura, N., Bradley, J., and M. Jones, “OpenID Connect Dynamic Client Registration 1.0,” July 2013.) [OpenID.Registration] specification. OPs can require that request_uri values used be pre-registered with the require_request_uri_registration discovery parameter.
The entire Request URI MUST NOT exceed 512 ASCII characters.
The contents of the resource referenced by the URL MUST be a Request Object. The scheme used in the request_uri value MUST be https, unless the target Request Object is signed in a way that is verifiable by the Authorization Server. The request_uri value MUST be reachable by the Authorization Server, and SHOULD be reachable by the Client.
The following is a non-normative example of the contents of a Request Object resource that can be referenced by a request_uri (with line wraps within values for display purposes only):
eyJhbGciOiJSUzI1NiJ9.ew0KICJyZXNwb25zZV90eXBlIjogImNvZGUgaWRfdG9rZ W4iLA0KICJjbGllbnRfaWQiOiAiczZCaGRSa3F0MyIsDQogInJlZGlyZWN0X3VyaSI 6ICJodHRwczovL2NsaWVudC5leGFtcGxlLm9yZy9jYiIsDQogInNjb3BlIjogIm9wZ W5pZCIsDQogInN0YXRlIjogImFmMGlmanNsZGtqIiwNCiAibm9uY2UiOiAibi0wUzZ fV3pBMk1qIiwNCiAibWF4X2FnZSI6IDg2NDAwLA0KICJjbGFpbXMiOiANCiAgew0KI CAgInVzZXJpbmZvIjogDQogICAgew0KICAgICAiZ2l2ZW5fbmFtZSI6IHsiZXNzZW5 0aWFsIjogdHJ1ZX0sDQogICAgICJuaWNrbmFtZSI6IG51bGwsDQogICAgICJlbWFpb CI6IHsiZXNzZW50aWFsIjogdHJ1ZX0sDQogICAgICJlbWFpbF92ZXJpZmllZCI6IHs iZXNzZW50aWFsIjogdHJ1ZX0sDQogICAgICJwaWN0dXJlIjogbnVsbA0KICAgIH0sD QogICAiaWRfdG9rZW4iOiANCiAgICB7DQogICAgICJnZW5kZXIiOiBudWxsLA0KICA gICAiYmlydGhkYXRlIjogeyJlc3NlbnRpYWwiOiB0cnVlfSwNCiAgICAgImFjciI6I HsidmFsdWVzIjogWyIyIl19DQogICAgfQ0KICB9DQp9.bOD4rUiQfzh4QPIs_f_R2G VBhNHcc1p2cQTgixB1tsYRs52xW4TO74USgb-nii3RPsLdfoPlsEbJLmtbxG8-TQBH qGAyZxMDPWy3phjeRt9ApDRnLQrjYuvsCj6byu9TVaKX9r1KDFGT-HLqUNlUTpYtCy M2B2rLkWM08ufBq9JBCEzzaLRzjevYEPMaoLAOjb8LPuYOYTBqshRMUxy4Z380-FJ2 Lc7VSfSu6HcB2nLSjiKrrfI35xkRJsaSSmjasMYeDZarYCl7r4o17rFclk5KacYMYg As-JYFkwab6Dd56ZrAzakHt9cExMpg04lQIux56C-Qk6dAsB6W6W91AQ
TOC |
The Client stores the Request Object resource either locally or remotely at a URL the Server can access. This is the Request URI, request_uri.
If the Request Object includes attribute values, it MUST NOT be revealed to anybody but the Authorization Server. As such, the request_uri MUST have appropriate entropy for its lifetime. It is RECOMMENDED that it be removed if it is known that it will not be used again or after a reasonable timeout unless access control measures are taken.
The following is a non-normative example of a Request URI value (with line wraps within values for display purposes only):
https://client.example.org/request.jwt# GkurKxf5T0Y-mnPFCHqWOMiZi4VS138cQO_V7PZHAdM
TOC |
The Client sends the Authorization Request to the Authorization Endpoint.
The following is a non-normative example of an Authorization Request using the request_uri parameter (with line wraps within values for display purposes only):
https://server.example.com/authorize? response_type=code%20id_token &client_id=s6BhdRkqt3 &request_uri=https%3A%2F%2Fclient.example.org%2Frequest.jwt %23GkurKxf5T0Y-mnPFCHqWOMiZi4VS138cQO_V7PZHAdM &state=af0ifjsldkj&nonce=n-0S6_WzA2Mj &scope=openid
TOC |
Upon receipt of the Request, the Authorization Server MUST send a GET request to the request_uri to retrieve the content unless it is already cached and parse it to recreate the Authorization Request parameters.
Note that the RP SHOULD use a unique URI for each request utilizing distinct parameters, or otherwise prevent the Authorization Server from caching the request_uri.
The following is a non-normative example of this fetch process:
GET /request.jwt HTTP/1.1 Host: client.example.org
TOC |
There are several reasons that one might choose to use the request_uri parameter:
TOC |
When the request or request_uri Authorization Request parameters are used, additional steps must be performed to validate the Authentication Request beyond those specified in Sections 2.1.2.2 (Authorization Request Validation), 2.2.2.2 (Authorization Request Validation), or 2.3.2.2 (Authorization Request Validation). These steps are to validate the JWT containing the Request Object and to validate the Request Object itself.
TOC |
If the Authorization Server has advertised JWE encryption algorithms in the request_object_encryption_alg_values_supported and request_object_encryption_enc_values_supported elements of its Discovery document [OpenID.Discovery] (Sakimura, N., Bradley, J., Jones, M., and E. Jay, “OpenID Connect Discovery 1.0,” July 2013.), or has supplied encryption algorithms by other means, these are used by the Client to encrypt the JWT.
The Authorization Server MUST decrypt the JWT in accordance with the JSON Web Encryption (Jones, M., Rescorla, E., and J. Hildebrand, “JSON Web Encryption (JWE),” May 2013.) [JWE] specification. The result MAY be either a signed or unsigned (plaintext) Request Object. In the former case, signature validation MUST be performed as defined in Section 5.3.2 (Signed Request Object).
The Authorization Server MUST return an error if decryption fails.
TOC |
To perform Signature Validation, the alg parameter in the JWS header MUST match the value of the request_object_signing_alg set during Client Registration [OpenID.Registration] (Sakimura, N., Bradley, J., and M. Jones, “OpenID Connect Dynamic Client Registration 1.0,” July 2013.) or a value that was pre-registered by other means. The signature MUST be validated against the key registered for that client_id and algorithm, in accordance with the JSON Web Signature (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.) [JWS] specification.
The Authorization Server MUST return an error if signature validation fails.
TOC |
The Authorization Server MUST assemble the set of Authorization Request parameters to be used from the Request Object value and the OAuth 2.0 Authorization Request parameters (minus the request or request_uri parameters). If the same parameter exists both in the Request Object and the OAuth Authorization Request parameters, the parameter in the Request Object is used. Using this set of Authorization Request parameters, the Authorization Server then validates the request the normal manner for the flow being used, as specified in Sections 2.1.2.2 (Authorization Request Validation), 2.2.2.2 (Authorization Request Validation), or 2.3.2.2 (Authorization Request Validation).
TOC |
OpenID Connect supports Self-Issued OpenID Providers - personal OPs that issue self-signed ID Tokens. Self-Issued OPs use the special Issuer Identifier https://self-issued.me.
The messages used to communicate with Self-Issued OPs are mostly the same as those used to communicate with other OPs. Specifications for the few additional parameters used and for the values of some parameters in the Self-Issued case are defined in this section.
TOC |
If the input identifier for the discovery process contains the domain self-issued.me, dynamic discovery is not performed. Instead, then the following static configuration values are used:
{ "authorization_endpoint": "openid:", "issuer": "https://self-issued.me", "scopes_supported": ["openid", "profile", "email", "address", "phone"], "response_types_supported": ["id_token"], "subject_types_supported": ["pairwise"], "id_token_signing_alg_values_supported": ["RS256"], "request_object_signing_alg_values_supported": ["none", "RS256"] }
Note: The OpenID Foundation may consider hosting a site https://self-issued.me/ that returns the above static configuration file so that the Client would not need any special treatment for discovery of the Self-Issued OP.
TOC |
When using a Self-Issued OP, the Client is deemed to have registered with the OP and obtained following Client Registration Response.
- client_id
- redirect_uri value of the Client.
- client_secret_expires_at
- 0
Note: The OpenID Foundation may consider hosting the (stateless) endpoint https://self-issued.me/registration/1.0/ that returns the response above so that the Client would not need to perform any special processing for registration of a Self-Issued OP.
TOC |
OpenID Connect defines the following Authorization Request parameter to enable Clients to provide additional registration information to Self-Issued OpenID Providers:
- registration
- OPTIONAL. This parameter is used by the Client to provide information about itself to a Self-Issued OP that would normally be provided to an OP during Dynamic Client Registration. The registration parameter SHOULD NOT be used when the OP is not a Self-Issued OP.
None of this information is REQUIRED by Self-Issued OPs, so the use of this parameter is OPTIONAL.
The registration parameter value is represented in an OAuth 2.0 request as UTF-8 encoded JSON (which ends up being form-urlencoded when passed as an OAuth parameter). When used in a Request Object value, per Section 5.1 (Passing a Request Object by Value), the JSON is used as the value of the registration member.
The Registration parameters that would typically be used in requests to Self-Issued OPs are policy_uri, tos_uri, and logo_uri. If the Client uses more than one redirection URI, the redirect_uris parameter would be used to register them. Finally, if the Client is requesting encrypted responses, it would use the jwks_uri, id_token_encrypted_response_alg and id_token_encrypted_response_enc parameters.
TOC |
The Client sends the Authorization Request to the Authorization Endpoint with the following parameters:
- response_type
- REQUIRED. Constant string value id_token.
- client_id
- REQUIRED. Client ID value for the Client, which in this case contains the redirect_uri value of the Client. Since the Client's redirect_uri URI value is communicated as the Client ID, a redirect_uri parameter is NOT REQUIRED to also be included in the request.
- scope
- REQUIRED. scope parameter value, as specified in Section 2.1.2.1.1 (Authorization Request Parameters).
- id_token_hint
- OPTIONAL. Previously issued ID Token passed to the Authorization Server as a hint about the End-User's current or past authenticated session with the Client. This SHOULD be present when prompt=none is used. If the End-User identified by the ID Token is logged in or is logged in by the request, then the Authorization Server returns a positive response; otherwise, it SHOULD return a negative response.
- If the ID Token received by the RP is encrypted, the Client MUST decrypt the signed ID Token contained within the encrypted ID Token. The Client MAY re-encrypt the signed ID token to the Authentication Server using a key that enables the server to decrypt the ID Token. In this case, the sub (subject) of the signed ID Token MUST be sent as the kid (Key ID) of the JWE. Encrypting content to Self-Issued OPs is currently only supported when the OP's JWK key type is RSA and the encryption algorithm used is RSA1_5.
- claims
- OPTIONAL. This parameter is used to request that specific Claims be returned. The value is a JSON object, as specified in Section 4.5 (Requesting Claims using the "claims" Request Parameter).
- registration
- OPTIONAL. This parameter is used by the Client to provide information about itself to a Self-Issued OP that would normally be provided to an OP during Dynamic Client Registration, as specified in Section 6.2.1 (Providing Information with the "registration" Request Parameter).
- request
- OPTIONAL. Request Object value, as specified in Section 5.1 (Passing a Request Object by Value). The Request Object MAY be encrypted in a JWE by the Client. In this case, the sub (subject) of a previously issued ID Token for this Client MUST be sent as the kid (Key ID) of the JWE. Encrypting content to Self-Issued OPs is currently only supported when the OP's JWK key type is RSA and the encryption algorithm used is RSA1_5.
Other parameters MAY be sent. Note that all Claims are returned in the ID Token.
The entire URL MUST NOT exceed 2048 ASCII characters.
The following is a non-normative example response (with line wraps within values for display purposes only):
HTTP/1.1 302 Found Location: openid://? response_type=id_token &client_id=https%3A%2F%2Fclient.example.org%2Fcb &scope=openid%20profile &state=af0ifjsldkj &nonce=n-0S6_WzA2Mj registration=&%7B%22logo_uri%22%3A%22https%3A%2F%2F client.example.org%2Flogo.png%22%7D
TOC |
OpenID Connect defines the following Claim for use in Self-Issued OpenID Provider Responses:
- sub_jwk
- REQUIRED. Public key value used to check the signature of an ID Token issued by a Self-Issued OpenID Provider, as specified in Section 6 (Self-Issued OpenID Provider). The key is a bare key in JWK [JWK] (Jones, M., “JSON Web Key (JWK),” May 2013.) format (not an X.509 certificate value). The sub_jwk value is a JSON object. Use of the sub_jwk Claim is NOT RECOMMENDED when the OP is not Self-Issued.
The Self-Issued OpenID Provider response is the same as the normal implicit flow response with the following refinements. Since it is an implicit flow response, the response parameters will be returned in the URL fragment component.
TOC |
If any of the validation procedures defined in this specification fail, any operations requiring the information that failed to correctly validate MUST be aborted and the information that failed to validate MUST NOT be used.
To validate the ID Token in the Authorization or Token Endpoint Response, the Client MUST do the following:
The following is a non-normative example of a base64url decoded Self-Issued ID Token (with line wraps within values for display purposes only):
{ "iss": "https://self-issued.me", "sub": "wBy8QvHbPzUnL0x63h13QqvUYcOur1X0cbQpPVRqX5k", "aud": "https://client.example.org/cb", "nonce": "n-0S6_WzA2Mj", "exp": 1311281970, "iat": 1311280970, "sub_jwk": { "kty":"RSA", "n": "0vx7agoebGcQSuuPiLJXZptN9nndrQmbXEps2aiAFbWhM78LhWx 4cbbfAAtVT86zwu1RK7aPFFxuhDR1L6tSoc_BJECPebWKRXjBZCiFV4n3oknjhMs tn64tZ_2W-5JsGY4Hc5n9yBXArwl93lqt7_RN5w6Cf0h4QyQ5v-65YGjQR0_FDW2 QvzqY368QQMicAtaSqzs8KJZgnYb9c7d0zgdAZHzu6qMQvRL5hajrn1n91CbOpbI SD08qNLyrdkt-bFTWhAI4vMQFh6WeZu0fM4lFd2NcRwr3XPksINHaQ-G_xBniIqb w0Ls1jF44-csFCur-kEgU8awapJzKnqDKgw", "e":"AQAB" } }
TOC |
The OpenID Provider's Discovery document SHOULD list its supported identifier types in the subject_types_supported element. If there is more than one type listed in the array, the Client MAY elect to provide its preferred identifier type using the subject_type parameter during Registration. The types supported by this specification are:
- public
- This provides the same sub (subject) value to all Clients. It is the default if the provider has no subject_types_supported element in its discovery document.
- pairwise
- This provides a different sub value to each Client, to prevent correlation of the End-User's activities by Clients without his permission.
TOC |
The OpenID Provider MUST calculate a unique sub (subject) value for each Sector Identifier. The subject value MUST NOT be reversible by any party other than the OpenID Provider.
Providers who use pairwise sub values SHOULD support the sector_identifier_uri in Dynamic Client Registration (Sakimura, N., Bradley, J., and M. Jones, “OpenID Connect Dynamic Client Registration 1.0,” July 2013.) [OpenID.Registration]. It provides a way for a group of websites under common administrative control to have consistent pairwise sub values independent of the individual domain names. It also provides a way for Clients to change redirect_uri domains without having to reregister all of their users.
If the Client has not provided a value for sector_identifier_uri in Dynamic Client Registration (Sakimura, N., Bradley, J., and M. Jones, “OpenID Connect Dynamic Client Registration 1.0,” July 2013.) [OpenID.Registration], the Sector Identifier used for pairwise identifier calculation is the host component of the registered redirect_uri. If there are multiple hostnames in the registered redirect_uris, the Client MUST register a sector_identifier_uri.
When a sector_identifier_uri is provided, the host component of that URL is used as the Sector Identifier for the pairwise identifier calculation. The value of the sector_identifier_uri MUST be a URL using the https scheme that points to a JSON file containing an array of redirect_uri values. The values of the registered redirect_uris MUST be included in the elements of the array, or the registration MUST fail.
A number of algorithms can be used by OpenID Providers to calculate pairwise identifiers. Three example methods are:
TOC |
During Client Registration, the RP (Client) MAY register an authentication method. If no method is registered, the default method of client_secret_basic MUST be used.
The Supported options are:
- client_secret_basic
- Clients that have received a client_secret value from the Authorization Server, authenticate with the Authorization Server in accordance with Section 3.2.1 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749] using HTTP Basic authentication scheme.
- client_secret_post
- Clients that have received a client_secret value from the Authorization Server, authenticate with the Authorization Server in accordance with Section 3.2.1 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749] by including the Client Credentials in the request body.
- client_secret_jwt
- Clients that have received a client_secret value from the Authorization Server create a JWT using an HMAC SHA algorithm, such as HMAC SHA-256. The HMAC (Hash-based Message Authentication Code) is calculated using the octets of the UTF-8 representation of the client_secret as the shared key.
- The Client authenticates in accordance with Section 2.2 of OAuth JWT Bearer Token Profiles (Jones, M., Campbell, B., and C. Mortimore, “JSON Web Token (JWT) Bearer Token Profiles for OAuth 2.0,” March 2013.) [OAuth.JWT] and OAuth 2.0 Assertion Profile (Campbell, B., Mortimore, C., Jones, M., and Y. Goland, “Assertion Framework for OAuth 2.0,” March 2013.) [OAuth.Assertions]. The JWT MUST contain the following REQUIRED Claim Values and MAY contain the following OPTIONAL Claim Values:
- iss
- REQUIRED. Issuer. This MUST contain the client_id of the OAuth Client.
- sub
- REQUIRED. Subject. This MUST contain the client_id of the OAuth Client.
- aud
- REQUIRED. Audience. The aud (audience) Claim. Value that identifies the Authorization Server as an intended audience. The Authorization Server MUST verify that it is an intended audience for the token. The Audience SHOULD be the URL of the Authorization Server's Token Endpoint.
- jti
- REQUIRED. JWT ID. A unique identifier for the token. The JWT ID MAY be used by implementations requiring message de-duplication for one-time use assertions.
- exp
- REQUIRED. Expiration time on or after which the ID Token MUST NOT be accepted for processing.
- iat
- OPTIONAL. Time at which the JWT was issued.
- ID Tokens MAY contain other Claims. Any Claims used that are not understood MUST be ignored.
- The authentication token MUST be sent as the value of the [OAuth.Assertions] (Campbell, B., Mortimore, C., Jones, M., and Y. Goland, “Assertion Framework for OAuth 2.0,” March 2013.) client_assertion parameter.
- The value of the [OAuth.Assertions] (Campbell, B., Mortimore, C., Jones, M., and Y. Goland, “Assertion Framework for OAuth 2.0,” March 2013.) client_assertion_type parameter MUST be "urn:ietf:params:oauth:client-assertion-type:jwt-bearer", per [OAuth.JWT] (Jones, M., Campbell, B., and C. Mortimore, “JSON Web Token (JWT) Bearer Token Profiles for OAuth 2.0,” March 2013.).
- private_key_jwt
- Clients that have registered a public key sign a JWT using that key. The Client authenticates in accordance with Section 2.2 of OAuth JWT Bearer Token Profiles (Jones, M., Campbell, B., and C. Mortimore, “JSON Web Token (JWT) Bearer Token Profiles for OAuth 2.0,” March 2013.) [OAuth.JWT] and OAuth 2.0 Assertion Profile (Campbell, B., Mortimore, C., Jones, M., and Y. Goland, “Assertion Framework for OAuth 2.0,” March 2013.) [OAuth.Assertions]. The JWT MUST contain the following REQUIRED Claim Values and MAY contain the following OPTIONAL Claim Values:
- iss
- REQUIRED. Issuer. This MUST contain the client_id of the OAuth Client.
- sub
- REQUIRED. Subject. This MUST contain the client_id of the OAuth Client.
- aud
- REQUIRED. Audience. The aud (audience) Claim. Value that identifies the Authorization Server as an intended audience. The Authorization Server MUST verify that it is an intended audience for the token. The Audience SHOULD be the URL of the Authorization Server's Token Endpoint.
- jti
- REQUIRED. JWT ID. A unique identifier for the token. The JWT ID MAY be used by implementations requiring message de-duplication for one-time use assertions.
- exp
- REQUIRED. Expiration time on or after which the ID Token MUST NOT be accepted for processing.
- iat
- OPTIONAL. Time at which the JWT was issued.
- The JWT MAY contain other Claims. Any Claims used that are not understood MUST be ignored.
- The authentication token MUST be sent as the value of the [OAuth.Assertions] (Campbell, B., Mortimore, C., Jones, M., and Y. Goland, “Assertion Framework for OAuth 2.0,” March 2013.) client_assertion parameter.
- The value of the [OAuth.Assertions] (Campbell, B., Mortimore, C., Jones, M., and Y. Goland, “Assertion Framework for OAuth 2.0,” March 2013.) client_assertion_type parameter MUST be "urn:ietf:params:oauth:client-assertion-type:jwt-bearer", per [OAuth.JWT] (Jones, M., Campbell, B., and C. Mortimore, “JSON Web Token (JWT) Bearer Token Profiles for OAuth 2.0,” March 2013.).
For example (with line wraps within values for display purposes only):
POST /token HTTP/1.1 Host: server.example.com Content-Type: application/x-www-form-urlencoded grant_type=authorization_code& code=i1WsRn1uB1& client_id=s6BhdRkqt3& client_assertion_type= urn%3Aietf%3Aparams%3Aoauth%3Aclient-assertion-type%3Ajwt-bearer& client_assertion=PHNhbWxwOl ... ZT
TOC |
Depending on the transport through which the messages are sent, the integrity of the message might not be guaranteed and the originator of the message might not be authenticated. To mitigate these risks, Request Object, ID Token, and UserInfo Response values MAY utilize JSON Web Signature (JWS) (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.) [JWS] to sign the contents.
To achieve message confidentiality, Request Object, ID Token, and UserInfo Response values MAY use JSON Web Encryption (JWE) (Jones, M., Rescorla, E., and J. Hildebrand, “JSON Web Encryption (JWE),” May 2013.) [JWE] to encrypt the content.
When the message is both signed and encrypted, it MUST be signed first and then encrypted, per Section 15.14 (Signing and Encryption Order), with nesting performed in the same manner as specified for JWTs [JWT] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.). Note that all JWE encryption methods perform integrity checking.
TOC |
The server advertises its supported signing and encryption algorithms in its discovery document. The algorithm identifiers are specified in JWA (Jones, M., “JSON Web Algorithms (JWA),” May 2013.) [JWA]. The related elements are:
- userinfo_signing_alg_values_supported
- JSON array containing a list of the JWS [JWS] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” May 2013.) signing algorithms (alg values) [JWA] (Jones, M., “JSON Web Algorithms (JWA),” May 2013.) supported by the UserInfo Endpoint to encode the Claims in a JWT [JWT] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.).
- userinfo_encryption_alg_values_supported
- JSON array containing a list of the JWE [JWE] (Jones, M., Rescorla, E., and J. Hildebrand, “JSON Web Encryption (JWE),” May 2013.) encryption algorithms (alg values) [JWA] (Jones, M., “JSON Web Algorithms (JWA),” May 2013.) supported by the UserInfo Endpoint to encode the Claims in a JWT [JWT] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.).
- userinfo_encryption_enc_values_supported
- JSON array containing a list of the JWE encryption algorithms (enc values) [JWA] (Jones, M., “JSON Web Algorithms (JWA),” May 2013.) supported by the UserInfo Endpoint to encode the Claims in a JWT [JWT] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.).
- id_token_signing_alg_values_supported
- JSON array containing a list of the JWS signing algorithms (alg values) supported by the Authorization Server for the ID Token to encode the Claims in a JWT [JWT] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.).
- id_token_encryption_alg_values_supported
- JSON array containing a list of the JWE encryption algorithms (alg values) supported by the Authorization Server for the ID Token to encode the Claims in a JWT [JWT] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.).
- id_token_encryption_enc_values_supported
- JSON array containing a list of the JWE encryption algorithms (enc values) supported by the Authorization Server for the ID Token to encode the Claims in a JWT [JWT] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.).
- request_object_signing_alg_values_supported
- JSON array containing a list of the JWS signing algorithms (alg values) supported by the Authorization Server for Request Object values. Servers SHOULD support none and RS256.
- request_object_encryption_alg_values_supported
- JSON array containing a list of the JWE encryption algorithms (alg values) supported by the Authorization Server for Request Object values.
- request_object_encryption_enc_values_supported
- JSON array containing a list of the JWE encryption algorithms (enc values) supported by the Authorization Server for Request Object values.
- token_endpoint_auth_signing_alg_values_supported
- JSON array containing a list of the JWS signing algorithms (alg values) supported by the Token Endpoint for the private_key_jwt and client_secret_jwt methods to encode the JWT [JWT] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.). Servers SHOULD support RS256.
The Client registers its REQUIRED algorithms for Signing and Encryption using the following Registration parameters:
- request_object_signing_alg
- OPTIONAL. JWS signature algorithm [JWA] (Jones, M., “JSON Web Algorithms (JWA),” May 2013.) REQUIRED for Request Objects by the Authorization Server. All Request Objects from this client_id MUST be rejected if not signed by this algorithm. Servers SHOULD support RS256.
- userinfo_signed_response_alg
- OPTIONAL. JWS signature algorithm [JWA] (Jones, M., “JSON Web Algorithms (JWA),” May 2013.) REQUIRED for UserInfo Responses. If this is specified the response will be JWT (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.) [JWT] serialized.
- userinfo_encrypted_response_alg
- OPTIONAL. JWE alg algorithm [JWA] (Jones, M., “JSON Web Algorithms (JWA),” May 2013.) REQUIRED for UserInfo Responses. If this is requested in combination with signing, the response MUST be signed first then encrypted, per Section 15.14 (Signing and Encryption Order). If this is specified, the response will be JWT (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.) [JWT] serialized.
- userinfo_encrypted_response_enc
- OPTIONAL. JWE enc algorithm [JWA] (Jones, M., “JSON Web Algorithms (JWA),” May 2013.) REQUIRED for UserInfo Responses. If userinfo_encrypted_response_alg is specified the default for this value is A128CBC-HS256.
- id_token_signed_response_alg
- OPTIONAL. JWS signature algorithm [JWA] (Jones, M., “JSON Web Algorithms (JWA),” May 2013.) REQUIRED for ID Tokens issued to this client_id. The default if not specified is RS256. The public key for validating the signature is provided by retrieving the JWK Set referenced by the jwks_uri element from Discovery.
- id_token_encrypted_response_alg
- OPTIONAL. JWE alg algorithm [JWA] (Jones, M., “JSON Web Algorithms (JWA),” May 2013.) REQUIRED for ID Tokens issued to this client_id. If this is requested, the response MUST be signed then encrypted. The default if not specified is no encryption.
- id_token_encrypted_response_enc
- OPTIONAL. JWE enc algorithm [JWA] (Jones, M., “JSON Web Algorithms (JWA),” May 2013.) REQUIRED for ID Tokens issued to this client_id. If id_token_encrypted_response_alg is specified the default for this value is A128CBC-HS256.
TOC |
The OpenID Provider provides its public keys during Discovery using the following element:
- jwks_uri
- REQUIRED. URL of the OP's JSON Web Key Set [JWK] (Jones, M., “JSON Web Key (JWK),” May 2013.) document. This contains the signing key(s) the Client uses to validate signatures from the OP. The JWK Set MAY also contain the Server's encryption key(s), which are used by Clients to encrypt requests to the Server. When both signing and encryption keys are made available, a use (Key Use) parameter value is REQUIRED for all keys in the document to indicate each key's intended usage.
Likewise, the Client can provide its public keys during Registration using the following element:
- jwks_uri
- OPTIONAL. URL for the Client's JSON Web Key Set [JWK] (Jones, M., “JSON Web Key (JWK),” May 2013.) document. If the Client signs requests to the Server, it contains the signing key(s) the Server uses to validate signatures from the Client. The JWK Set MAY also contain the Client's encryption keys(s), which are used by the Server to encrypt responses to the Client. When both signing and encryption keys are made available, a use (Key Use) parameter value is REQUIRED for all keys in the document to indicate each key's intended usage.
When both signing and encryption keys are made available, the use (Key Use) parameter value is REQUIRED for all keys in the JWK Set at the jwks_uri to indicate each key's intended usage. Although some algorithms allow the same key pair to be used for both signatures and encryption, doing so is NOT RECOMMENDED, as it is less secure.
In both cases, the JWK x5c parameter MAY be used to provide X.509 representations of keys provided. When used, the bare key values MUST still be present and MUST match those in the certificate.
TOC |
The signing party MUST select a signature algorithm based on the supported algorithms of the recipient in Section 9.1 (Supported Algorithms).
- Asymmetric Signatures
- When using RSA or ECDSA Signatures, the alg Claim of the JWS header MUST be set to the appropriate algorithm as defined in JSON Web Algorithms (Jones, M., “JSON Web Algorithms (JWA),” May 2013.) [JWA]. The private key MUST be the one associated with the Public Signing Key provided in Section 9.2 (Keys). If there are multiple keys in the referenced JWK document, a kid value MUST be provided in the JWS header. The key usage of the respective keys MUST support signature.
- Symmetric Signatures
- When using MAC-based signatures, the alg Claim of the JWS header MUST be set to a MAC algorithm, as defined in JSON Web Algorithms (Jones, M., “JSON Web Algorithms (JWA),” May 2013.) [JWA]. The MAC key used is the octets of the UTF-8 representation of the client_secret value. See Section 15.19 (Symmetric Key Entropy) for a discussion of entropy requirements for client_secret values. Symmetric signatures MUST never be used by public (non-confidential) Clients because of their inability to keep secrets.
See Section 15.20 (Need for Signed Requests) for Security Considerations about the need for signed requests.
TOC |
Rotation of signing keys can be accomplished with the following approach. The signer publishes its keys in a JWK Set at the jwks_uri location and includes the kid of the signing key in the JWS header of each message to indicate to the verifier which key is to be used to validate the signature. Keys can be rolled over by periodically adding new keys to the JWK Set at jwks_uri. The signer can begin using a new key at its discretion and signals the change to the verifier using the kid value. The verifier knows to go back to the jwks_uri to re-retrieve the keys when it sees an unfamiliar kid value. The JWK Set document at the jwks_uri SHOULD retain recently decommissioned signing keys for a reasonable period of time to facilitate a smooth transition.
TOC |
The encrypting party MUST select an encryption algorithm based on the supported algorithms of the recipient in Section 9.1 (Supported Algorithms). All JWTs MUST be signed before encryption to enable verification of the Issuer.
- Asymmetric Encryption: RSA
- Use the link registered/discovered in Section 9.2 (Keys) to retrieve the relevant key. If there are multiple keys in the referenced JWK document, a kid value MUST be provided in the JWE header. Use the supported RSA key wrapping algorithm to wrap a random Content Master Key to be used for encrypting the signed JWT. The key usage of the respective keys MUST include encryption.
- Asymmetric Encryption: Elliptic Curve
- Create an ephemeral Elliptic Curve public key for the epk element of the JWE header. Use the link registered/discovered in Section 9.2 (Keys) to retrieve the relevant key. If there are multiple keys in the referenced JWK document, a kid value MUST be provided in the JWE header. Use the ECDH-ES algorithm to wrap a random Content Master Key to be used for encrypting the signed JWT. The key usage of the respective keys MUST support encryption.
- Symmetric Encryption
- The symmetric encryption key is derived from the client_secret value by using a left truncated SHA-256 hash of the octets of the UTF-8 representation of the client_secret. The SHA-256 value MUST be left truncated to the appropriate bit length for the AES key wrapping algorithm used, for instance, to 128 bits for A128KW. If a key wrapping key with greater than 256 bits is needed, a different method of deriving the key from the client_secret would have to be defined by an extension. Symmetric encryption MUST never be used by public (non-confidential) Clients because of their inability to keep secrets.
See Section 15.21 (Need for Encrypted Requests) for Security Considerations about the need for encrypted requests.
TOC |
Rotating encryption keys is necessarily a different process than for signing keys because the encrypting party starts the process and thus cannot rely on a change in kid as a signal to know that keys need to change. The encrypting party still uses the kid header in the JWE to tell the decrypting party which private key to use to decrypt, however, the encrypting party needs to first select the most appropriate key from those provided in the JWK Set at jwks_uri. To rotate keys, the decrypting party can publish new keys at jwks_uri and remove from the JWK Set those that are being decommissioned. The jwks_uri SHOULD include a Cache-Control header in the response that contains a max-age directive, as defined in RFC 2616 (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.) [RFC2616], which allows the encrypting party to safely cache the JWK Set and not have to re-retrieve the document for every encryption event. The decrypting party SHOULD remove decommissioned keys from the JWK Set at jwks_uri but retain them internally for some reasonable period of time, coordinated with the cache duration, to facilitate a smooth transition between keys by allowing the encrypting party some time to obtain the new keys. The cache duration SHOULD also be coordinated with the issuance of new signing keys as described in Section 9.3.1 (Rotation of Asymmetric Signing Keys).
TOC |
OpenID Connect defines the following scope value to request offline access:
- offline_access
- OPTIONAL. This scope value requests that an OAuth 2.0 Refresh Token be issued that can be used to obtain an Access Token that grants access to the End-User's UserInfo Endpoint even when the End-User is not present (not logged in).
When offline access is requested, a prompt parameter value of consent MUST be used unless other conditions for processing permitting offline access to the requested resources are in place. The OP MUST always obtain consent to returning a Refresh Token that enables offline access to the requested resources. A previously saved user consent is not always sufficient to grant offline access.
Upon receipt of a scope parameter containing the offline_access value, the Authorization Server:
The use of Refresh Tokens is not exclusive to the offline_access use case. The Authorization Server MAY grant Refresh Tokens in other contexts that are beyond the scope of this specification.
TOC |
A request to the Token Endpoint can also use a Refresh Token by using the grant_type value refresh_token, as described in Section 6 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749]. This section defines the behaviors for OpenID Connect Authorization Servers when Refresh Tokens are used.
TOC |
To refresh an Access Token, the Client MUST authenticate to the Token Endpoint using the authentication method registered for its client_id, as documented in Section 8 (Client Authentication). The Client sends the parameters via HTTPS POST to the Token Endpoint using Form Serialization, per Section 12.2 (Form Serialization).
The following is a non-normative example of a Refresh Request (with line wraps within values for display purposes only):
POST /token HTTP/1.1 Host: server.example.com Content-Type: application/x-www-form-urlencoded client_id=s6BhdRkqt3 &client_secret=some_secret12345 &grant_type=refresh_token &refresh_token=8xLOxBtZp8 &scope=openid%20profile
The Authorization Server MUST validate the Refresh Token.
TOC |
Upon receipt of the Refresh Request, the Authorization Server MUST return either a successful response or an error response that corresponds to the received Refresh Token.
Upon successful validation of the Refresh Token, a successful response uses the application/json media type and the response body is the Token Response of Section 2.1.3.3 (Token Response) except that it might not contain an id_token.
If an ID Token is returned as a result of a token refresh request, the following requirements apply:
The following is a non-normative example of a Refresh Response:
HTTP/1.1 200 OK Content-Type: application/json Cache-Control: no-store Pragma: no-cache { "access_token": "TlBN45jURg", "token_type": "Bearer", "refresh_token": "9yNOxJtZa5", "expires_in": 3600 }
TOC |
If the Refresh Request is invalid or unauthorized, the Authorization Server returns the Token Error Response as defined in Section 5.2 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749].
TOC |
Messages are serialized using one of the following methods:
Not all methods can be used for all messages.
TOC |
In order to serialize the parameters using the Query String Serialization, the Client constructs the string by adding the parameters and values to the query component of a URL using the application/x-www-form-urlencoded format as defined by [W3C.REC‑html401‑19991224] (Hors, A., Raggett, D., and I. Jacobs, “HTML 4.01 Specification,” December 1999.). Query String Serialization is typically used in HTTP GET requests. The same serialization method is also used when adding parameters to the fragment component of a URL.
The following is a non-normative example of this serialization (with line wraps within values for display purposes only):
GET /authorize? response_type=code &scope=openid &client_id=s6BhdRkqt3 &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb HTTP/1.1 Host: server.example.com
TOC |
Parameters and their values are Form Serialized by adding the parameter names and values to the entity body of the HTTP request using the application/x-www-form-urlencoded format as defined by [W3C.REC‑html401‑19991224] (Hors, A., Raggett, D., and I. Jacobs, “HTML 4.01 Specification,” December 1999.). Form Serialization is typically used in HTTP POST requests.
The following is a non-normative example of this serialization (with line wraps within values for display purposes only):
POST /authorize HTTP/1.1 Host: server.example.com Content-Type: application/x-www-form-urlencoded response_type=code &scope=openid &client_id=s6BhdRkqt3 &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb
TOC |
The parameters are serialized into a JSON structure by adding each parameter at the highest structure level. Parameter names and string values are included as JSON strings. Numerical values are included as JSON numbers. Each parameter MAY have a JSON structure as its value.
The following is a non-normative example of this serialization:
{ "access_token": "SlAV32hkKG", "token_type": "Bearer", "expires_in": 3600, "refresh_token": "8xLOxBtZp8" }
TOC |
Processing some OpenID Connect messages requires comparing values in the messages to known values. For example, the Claim Names returned by the UserInfo Endpoint might be compared to specific Claim Names such as sub. Comparing Unicode strings, however, has significant security implications.
Therefore, comparisons between JSON strings and other Unicode strings MUST be performed as specified below:
In several places, this specification uses space delimited lists of strings. In all such cases, only the ASCII space character (0x20) MAY be used for this purpose.
TOC |
This specification defines features used by both Relying Parties and OpenID Providers. Features that are mandatory to implement for Relying Parties are already described in the OpenID Connect Basic Client Profile 1.0 (Sakimura, N., Bradley, J., Jones, M., de Medeiros, B., and C. Mortimore, “OpenID Connect Basic Client Profile 1.0,” July 2013.) [OpenID.Basic] and OpenID Connect Implicit Client Profile 1.0 (Sakimura, N., Bradley, J., Jones, M., de Medeiros, B., Mortimore, C., and E. Jay, “OpenID Connect Implicit Client Profile 1.0,” July 2013.) [OpenID.Implicit] specifications, and so are not discussed again here.
It is expected that some OpenID Providers will require static, out-of-band configuration of RPs using them, whereas others will support dynamic usage by RPs without a pre-established relationship between them. For that reason, the mandatory-to-implement features for OPs are listed below in two groups: the first for all OPs and the second for "Dynamic" OpenID Providers.
TOC |
All OpenID Providers MUST implement the following features defined in this specification. This list augments the set of features that are already listed elsewhere as being "REQUIRED" or are described with a "MUST", and so is not, by itself, a comprehensive set of implementation requirements for OPs.
- Signing ID Tokens with RSA SHA-256
- OPs MUST support signing ID Tokens with the RSA SHA-256 algorithm (an alg value of RS256).
- Prompt Parameter
- OPs MUST support the prompt parameter, as defined in Section 2.1.2.1.1 (Authorization Request Parameters), including the specified user interface behaviors such as none and login.
- Display Parameter
- OPs MUST support the display parameter, as defined in Section 2.1.2.1.1 (Authorization Request Parameters). (Note that the minimum level of support required for this parameter is simply to have its use not result in an error.)
- Preferred Locales
- OPs MUST support requests for preferred languages and scripts for the user interface and for Claims via the ui_locales and claims_locales request parameters, as defined in Section 2.1.2.1.1 (Authorization Request Parameters). (Note that the minimum level of support required for these parameters is simply to have their use not result in errors.)
- Authentication Time
- OPs MUST support returning the time at which the End-User authenticated via the auth_time Claim, as defined in Section 2.1.3.5 (ID Token).
- Maximum Authentication Age
- OPs MUST support enforcing a maximum authentication age via the max_age parameter, as defined in Section 2.1.2.1.1 (Authorization Request Parameters).
- Authentication Context Class Reference
- OPs MUST support requests for specific Authentication Context Class Reference values via the acr_values parameter, as defined in Section 2.1.2.1.1 (Authorization Request Parameters). (Note that the minimum level of support required for this parameter is simply to have its use not result in an error.)
TOC |
In addition to the features listed above, OpenID Providers supporting dynamic establishment of relationships with RPs that they do not have a pre-configured relationship with MUST also implement the following features defined in this and related specifications.
- Response Types
- These OpenID Providers MUST support the id_token response type and all that are not Self-Issued OPs MUST also support the id_token token and code response types.
- Discovery
- These OPs MUST support Discovery, as defined in OpenID Connect Discovery 1.0 (Sakimura, N., Bradley, J., Jones, M., and E. Jay, “OpenID Connect Discovery 1.0,” July 2013.) [OpenID.Discovery].
- Dynamic Registration
- These OPs MUST support Dynamic Client Registration, as defined in OpenID Connect Dynamic Client Registration 1.0 (Sakimura, N., Bradley, J., and M. Jones, “OpenID Connect Dynamic Client Registration 1.0,” July 2013.) [OpenID.Registration].
- UserInfo Endpoint
- All dynamic OPs that issue Access Tokens MUST support the UserInfo Endpoint, as defined in Section 4.3 (UserInfo Endpoint). (Self-Issued OPs do not issue Access Tokens.)
- Public Keys Published as Bare Keys
- These OPs MUST publish their public keys as bare keys, rather than in X.509 format.
- Request URI
- These OPs MUST support requests made using a Request Object value that is retrieved from a Request URI that is provided with the request_uri parameter, as defined in Section 2.1.2.1.1 (Authorization Request Parameters).
TOC |
Some OpenID Connect installations can use a pre-configured set of OpenID Providers and/or Relying Parties. In those cases, it might not be necessary to support dynamic discovery of information about identities or services or dynamic registration of Clients.
However, if installations choose to support unanticipated interactions between Relying Parties and OpenID Providers that do not have pre-configured relationships, they SHOULD accomplish this by implementing the facilities defined in the OpenID Connect Discovery 1.0 (Sakimura, N., Bradley, J., Jones, M., and E. Jay, “OpenID Connect Discovery 1.0,” July 2013.) [OpenID.Discovery] and OpenID Connect Dynamic Client Registration 1.0 (Sakimura, N., Bradley, J., and M. Jones, “OpenID Connect Dynamic Client Registration 1.0,” July 2013.) [OpenID.Registration] specifications.
TOC |
These related OpenID Connect specifications MAY be used in combination with this specification to provide additional functionality:
TOC |
This specification references the security considerations defined in Section 10 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749], and Section 5 of OAuth 2.0 Bearer Token Usage (Jones, M. and D. Hardt, “The OAuth 2.0 Authorization Framework: Bearer Token Usage,” October 2012.) [RFC6750]. Furthermore, the OAuth 2.0 Threat Model and Security Considerations (Lodderstedt, T., McGloin, M., and P. Hunt, “OAuth 2.0 Threat Model and Security Considerations,” January 2013.) [RFC6819] specification provides an extensive list of threats and controls that apply to this specification as well, given that it is based upon OAuth 2.0. ISO/IEC 29115 (International Organization for Standardization, “ISO/IEC 29115:2013 -- Information technology - Security techniques - Entity authentication assurance framework,” March 2013.) [ISO29115] also provides threats and controls that implementers need to take into account. Implementers are highly advised to read these references in detail and apply the countermeasures described therein.
In addition, the following list of attack vectors and remedies are also considered.
TOC |
If appropriate measures are not taken, a request might be disclosed to an attacker, posing security and privacy threats.
In addition to what is stated in Section 5.1.1 of [RFC6819] (Lodderstedt, T., McGloin, M., and P. Hunt, “OAuth 2.0 Threat Model and Security Considerations,” January 2013.), this standard provides a way to provide the confidentiality of the request end to end through the use of request or request_uri parameters, where the content of the request is an encrypted JWT with the appropriate key and cipher. This protects even against a compromised User-Agent in the case of indirect request.
TOC |
A malicious Server might masquerade as the legitimate server using various means. To detect such an attack, the Client needs to authenticate the server.
In addition to what is stated in Section 5.1.2 of [RFC6819] (Lodderstedt, T., McGloin, M., and P. Hunt, “OAuth 2.0 Threat Model and Security Considerations,” January 2013.), this standard provides a way to authenticate the Server through either the use of Signed or Encrypted JWTs with an appropriate key and cipher.
TOC |
An Attacker might generate a bogus token or modify the token content (such as the authentication or attribute statements) of an existing parseable token, causing the RP to grant inappropriate access to the Client. For example, an Attacker might modify the parseable token to extend the validity period; a Client might modify the parseable token to have access to information that they should not be able to view.
There are two ways to mitigate this attack:
TOC |
Access Tokens are credentials used to access Protected Resources, as defined in Section 1.4 of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749]. Access Tokens represent a Resource Owner's authorization and MUST NOT be exposed to unauthorized parties.
TOC |
The server response might contain authentication and attribute statements that include sensitive Client information. Disclosure of the response contents can make the Client vulnerable to other types of attacks.
The server response disclosure can be mitigated in the following two ways:
TOC |
A response might be repudiated by the server if the proper mechanisms are not in place. For example, if a Server does not digitally sign a response, the Server can claim that it was not generated through the services of the Server.
To mitigate this threat, the response MAY be digitally signed by the Server using a key that supports non-repudiation. The Client SHOULD validate the digital signature to verify that it was issued by a legitimate Server and its integrity is intact.
TOC |
Since it is possible for a compromised or malicious Client to send a request to the wrong party, a Client that was authenticated using only a bearer token can repudiate any transaction.
To mitigate this threat, the Server MAY require that the request be digitally signed by the Client using a key that supports non-repudiation. The Server SHOULD validate the digital signature to verify that it was issued by a legitimate Client and the integrity is intact.
TOC |
An Attacker uses the Access Token generated for one resource to obtain access to a second resource.
To mitigate this threat, the Access Token SHOULD be audience and scope restricted. One way of implementing it is to include the identifier of the resource for whom it was generated as audience. The resource verifies that incoming tokens include its identifier as the audience of the token.
TOC |
An Attacker attempts to use a one-time use token such as an Authorization Code that has already been used once with the intended Resource. To mitigate this threat, the token SHOULD include a timestamp and a short validity lifetime. The Relying Party then checks the timestamp and lifetime values to ensure that the token is currently valid.
Alternatively, the server MAY record the state of the use of the token and check the status for each request.
TOC |
In addition to the attack patterns described in Section 4.4.1.1 of [RFC6819] (Lodderstedt, T., McGloin, M., and P. Hunt, “OAuth 2.0 Threat Model and Security Considerations,” January 2013.), an Authorization Code can be captured in the User-Agent where the TLS session is terminated if the User-Agent is infected by malware. However, capturing it is not useful as long as the profile uses either Client authentication or an encrypted response.
TOC |
Token Substitution is a class of attacks in which a malicious user swaps various tokens, including swapping an Authorization Code for a legitimate user with another token that the attacker has. One means of accomplishing this is for the attacker to copy a token out one session and use it in an HTTP message for a different session, which is easy to do when the token is available to the browser; this is known as the "cut and paste" attack.
The implicit flow of OAuth 2.0 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749] is not designed to mitigate this risk. In Section 10.16, it normatively requires that any use of the authorization process as a form of delegated End-User authentication to the Client MUST NOT use the implicit flow without employing additional security mechanisms that enable the Client to determine whether the Access Token was issued for its use.
In OpenID Connect, this is mitigated through mechanisms provided through the ID Token. The ID Token is a signed security token that provides Claims such as iss (issuer), sub (subject), aud (audience), azp (authorized party), at_hash (access token hash), and c_hash (code hash). Using the ID Token, the Client is capable of detecting the Token Substitution Attack.
The c_hash in the ID Token enables Clients to prevent code substitution.
Also, a malicious user may attempt to impersonate a more privileged user by subverting the communication channel between the Authorization Endpoint and Client, or the Token Endpoint and Client, for example by swapping the code or reordering the messages, to convince the Token Endpoint that the attacker's authorization grant corresponds to a grant sent on behalf of a more privileged user.
For the HTTP binding defined by this specification, the responses to Token Requests are bound to the corresponding requests by message order in HTTP, as both the response containing the token and requests are protected by TLS, which will detect and prevent packet reordering.
When designing another binding of this specification to a protocol incapable of strongly binding Token Endpoint requests to responses, additional mechanisms to address this issue MUST be utilized. One such mechanism could be to include an ID Token with a c_hash Claim in the token request and response.
TOC |
A timing attack allows the attacker to obtain an unnecessary large amount of information through the elapsed time differences in the code paths taken by successful and unsuccessful decryption operations or successful and unsuccessful signature validation of a message. It can be used to reduce the effective key length of the cipher used.
Implementations SHOULD NOT terminate the validation process at the instant of the finding an error but SHOULD continue running until all the octets have been processed to avoid this attack.
TOC |
There are various crypto related attacks possible depending on the method used for encryption and signature / integrity checking. Implementers need to consult the Security Considerations for the JWT (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.) [JWT] specification and specifications that it references to avoid the vulnerabilities identified in these specifications.
TOC |
Signatures over encrypted text are not considered valid in many jurisdictions. Therefore, for integrity and non-repudiation, this specification requires signing the plain text JSON Claims.
TOC |
OpenID Connect supports multiple issuers per Host and Port combination. The issuer returned by discovery MUST exactly match the value of iss in the ID Token.
OpenID Connect treats the path component of any URI as part of the user identifier. For instance, the subject "1234" with an issuer of "https://example.com" is not equivalent to the subject "1234" with an issuer of "https://example.com/sales".
It is RECOMMENDED that only a single issuer per host be used.
TOC |
In the implicit grant flow, the Access Token is returned in the fragment component of the Client's redirect_uri through HTTPS, thus it is protected between the OP and the User-Agent, and User-Agent and the RP. The only the place it can be captured is the User-Agent where the TLS session is terminated, and is possible if the User-Agent is infested by malware.
TOC |
Implementations MUST support TLS. Which version(s) ought to be implemented will vary over time, and depend on the widespread deployment and known security vulnerabilities at the time of implementation. At the time of this writing, TLS version 1.2 [RFC5246] (Dierks, T. and E. Rescorla, “The Transport Layer Security (TLS) Protocol Version 1.2,” August 2008.) is the most recent version, but has very limited actual deployment, and might not be readily available in implementation toolkits. TLS version 1.0 [RFC2246] (Dierks, T. and C. Allen, “The TLS Protocol Version 1.0,” January 1999.) is the most widely deployed version, and will give the broadest interoperability.
To protect against information disclosure and tampering, confidentiality protection MUST be applied using TLS with a ciphersuite that provides confidentiality and integrity protection.
Whenever TLS is used, a TLS server certificate check MUST be performed, per RFC 6125 (Saint-Andre, P. and J. Hodges, “Representation and Verification of Domain-Based Application Service Identity within Internet Public Key Infrastructure Using X.509 (PKIX) Certificates in the Context of Transport Layer Security (TLS),” March 2011.) [RFC6125].
TOC |
Access Token grants are not revocable by the Authorization Server. Access Token grant lifetimes SHOULD be kept to single use or very short lifetimes.
If access to the UserInfo Endpoint or other protected resources is required, a Refresh Token SHOULD be used. The Client MAY then exchange the Refresh Token at the Token Endpoint for a fresh short-lived Access Token that can be used to access the resource.
The Authorization Server SHOULD clearly identify long-term grants to the User during Authorization. The Authorization Server SHOULD provide a mechanism for the End-User to revoke Refresh Tokens granted to a Client.
TOC |
In Section 9.3 (Signing) and Section 9.4 (Encryption), keys are derived from the client_secret value. Thus, when used with symmetric signing or encryption operations, client_secret values MUST contain sufficient entropy to generate cryptographically strong keys. Also, client_secret values MUST also contain at least the minimum of number of octets required for MAC keys for the particular algorithm used. So for instance, for HS256, the client_secret value MUST contain at least 8 octets (and almost certainly SHOULD contain more, since client_secret values are likely to use a restricted alphabet.
TOC |
In some situations, Clients might need to use signed requests to ensure that the desired request parameters are delivered to the OP without having been tampered with. For instance, the max_age and acr_values provide more assurance about the nature of the authentication performed when delivered in signed requests.
TOC |
In some situations, knowing the contents of an OpenID Connect request can, in and of itself, reveal sensitive information about the End-User. For instance, knowing that the Client is requesting a particular Claim or that it is requesting that a particular authentication method be used can reveal sensitive information about the End-User. OpenID Connect enables requests to be encrypted to the OpenID Provider to prevent such potentially sensitive information from being revealed.
TOC |
TOC |
The UserInfo Response typically contains Personally Identifiable Information (PII). As such, End-User consent for the release of the information for the specified purpose SHOULD be obtained at or prior to the authorization time in accordance with relevant regulations. The purpose of use is typically registered in association with the redirect_uris.
Only necessary UserInfo data should be stored at the Client and the Client SHOULD associate the received data with the purpose of use statement.
TOC |
The Resource Server SHOULD make the UserInfo access log available to the End-User so that the End-User can monitor who accessed his data.
TOC |
To protect the End-User from a possible correlation among Clients, the use of a Pairwise Pseudonymous Identifier (PPID) as the sub (subject) SHOULD be considered.
TOC |
Offline access enables access to Claims when the user is not present, posing greater privacy risk than the Claims transfer when the user is present. Therefore, it is prudent to obtain explicit consent for offline access to resources. This specification mandates the use of the prompt parameter to obtain consent unless it is a priori known that the request complies with the conditions for processing in each jurisdiction.
When an Access Token is returned in the front channel, there is a greater risk of it being exposed to an attacker, who could later use it to access the UserInfo endpoint. If the Access Token does not enable offline access and the server can differentiate whether the Client request has been made offline or online, the risk will be substantially reduced. Therefore, this specification mandates ignoring the offline access request when the Access Token is transmitted in the front channel. Note that differentiating between online and offline access from the server can be difficult especially for native clients. The server may well have to rely on heuristics. Also, the risk of exposure for the Access Token delivered in the front channel for the response types of code token and token is the same. Thus, the implementations should be prepared to detect the channel from which the Access Token was issued and deny offline access if the token was issued in the front channel.
Note that although these provisions require an explicit consent dialogue through the prompt parameter, the mere fact that the user pressed an "accept" button etc., might not constitute a valid consent. Developers should be aware that for the act of consent to be valid, typically, the impact of the terms have to be understood by the End-User, the consent must be freely given and not forced (i.e., other options have to be available), and the terms must fair and equitable. In general, it is advisable for the service to follow the required privacy principles in each jurisdiction and rely on other conditions of processing than simply explicit consent, as online self-service "explicit consent" often does not form a valid consent in some jurisdictions.
TOC |
TOC |
This specification registers the Claims defined in Section 4.2 (Standard Claims) and Section 2.1.3.5 (ID Token) in the IANA JSON Web Token Claims registry defined in [JWT] (Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” May 2013.).
TOC |
TOC |
This specification registers the following parameters in the IANA OAuth Parameters registry defined in RFC 6749 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749].
TOC |
TOC |
This specification registers the following errors in the IANA OAuth Extensions Error registry defined in RFC 6749 (Hardt, D., “The OAuth 2.0 Authorization Framework,” October 2012.) [RFC6749].
TOC |
TOC |
TOC |
[CORS] | Opera Software ASA, “Cross-Origin Resource Sharing,” July 2010. |
[E.164] | International Telecommunication Union, “E.164: The international public telecommunication numbering plan,” 2010. |
[IANA.Language] | Internet Assigned Numbers Authority (IANA), “Language Subtag Registry,” 2005. |
[ISO29115] | International Organization for Standardization, “ISO/IEC 29115:2013 -- Information technology - Security techniques - Entity authentication assurance framework,” ISO/IEC 29115, March 2013. |
[ISO3166-1] | International Organization for Standardization, “ISO 3166-1:1997. Codes for the representation of names of countries and their subdivisions -- Part 1: Country codes,” 1997. |
[ISO639-1] | International Organization for Standardization, “ISO 639-1:2002. Codes for the representation of names of languages -- Part 1: Alpha-2 code,” 2002. |
[ISO8601-2004] | International Organization for Standardization, “ISO 8601:2004. Data elements and interchange formats - Information interchange - Representation of dates and times,” 2004. |
[JWA] | Jones, M., “JSON Web Algorithms (JWA),” draft-ietf-jose-json-web-algorithms (work in progress), May 2013 (HTML). |
[JWE] | Jones, M., Rescorla, E., and J. Hildebrand, “JSON Web Encryption (JWE),” draft-ietf-jose-json-web-encryption (work in progress), May 2013 (HTML). |
[JWK] | Jones, M., “JSON Web Key (JWK),” draft-ietf-jose-json-web-key (work in progress), May 2013 (HTML). |
[JWS] | Jones, M., Bradley, J., and N. Sakimura, “JSON Web Signature (JWS),” draft-ietf-jose-json-web-signature (work in progress), May 2013 (HTML). |
[JWT] | Jones, M., Bradley, J., and N. Sakimura, “JSON Web Token (JWT),” draft-ietf-oauth-json-web-token (work in progress), May 2013 (HTML). |
[OAuth.Assertions] | Campbell, B., Mortimore, C., Jones, M., and Y. Goland, “Assertion Framework for OAuth 2.0,” draft-ietf-oauth-assertions (work in progress), March 2013 (HTML). |
[OAuth.JWT] | Jones, M., Campbell, B., and C. Mortimore, “JSON Web Token (JWT) Bearer Token Profiles for OAuth 2.0,” draft-ietf-oauth-jwt-bearer (work in progress), March 2013 (HTML). |
[OAuth.Responses] | de Medeiros, B., Ed., Scurtescu, M., and P. Tarjan, “OAuth 2.0 Multiple Response Type Encoding Practices,” June 2013. |
[OpenID.Discovery] | Sakimura, N., Bradley, J., Jones, M., and E. Jay, “OpenID Connect Discovery 1.0,” July 2013. |
[OpenID.Registration] | Sakimura, N., Bradley, J., and M. Jones, “OpenID Connect Dynamic Client Registration 1.0,” July 2013. |
[RFC2119] | Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” BCP 14, RFC 2119, March 1997 (TXT, HTML, XML). |
[RFC2246] | Dierks, T. and C. Allen, “The TLS Protocol Version 1.0,” RFC 2246, January 1999 (TXT). |
[RFC2616] | Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” RFC 2616, June 1999 (TXT, PS, PDF, HTML, XML). |
[RFC3339] | Klyne, G., Ed. and C. Newman, “Date and Time on the Internet: Timestamps,” RFC 3339, July 2002 (TXT, HTML, XML). |
[RFC3966] | Schulzrinne, H., “The tel URI for Telephone Numbers,” RFC 3966, December 2004 (TXT). |
[RFC3986] | Berners-Lee, T., Fielding, R., and L. Masinter, “Uniform Resource Identifier (URI): Generic Syntax,” STD 66, RFC 3986, January 2005 (TXT, HTML, XML). |
[RFC4627] | Crockford, D., “The application/json Media Type for JavaScript Object Notation (JSON),” RFC 4627, July 2006 (TXT). |
[RFC5246] | Dierks, T. and E. Rescorla, “The Transport Layer Security (TLS) Protocol Version 1.2,” RFC 5246, August 2008 (TXT). |
[RFC5322] | Resnick, P., Ed., “Internet Message Format,” RFC 5322, October 2008 (TXT, HTML, XML). |
[RFC5646] | Phillips, A. and M. Davis, “Tags for Identifying Languages,” BCP 47, RFC 5646, September 2009 (TXT). |
[RFC6125] | Saint-Andre, P. and J. Hodges, “Representation and Verification of Domain-Based Application Service Identity within Internet Public Key Infrastructure Using X.509 (PKIX) Certificates in the Context of Transport Layer Security (TLS),” RFC 6125, March 2011 (TXT). |
[RFC6711] | Johansson, L., “An IANA Registry for Level of Assurance (LoA) Profiles,” RFC 6711, August 2012 (TXT). |
[RFC6749] | Hardt, D., “The OAuth 2.0 Authorization Framework,” RFC 6749, October 2012 (TXT). |
[RFC6750] | Jones, M. and D. Hardt, “The OAuth 2.0 Authorization Framework: Bearer Token Usage,” RFC 6750, October 2012 (TXT). |
[RFC6819] | Lodderstedt, T., McGloin, M., and P. Hunt, “OAuth 2.0 Threat Model and Security Considerations,” RFC 6819, January 2013 (TXT). |
[USA15] | Davis, M., Whistler, K., and M. Dürst, “Unicode Normalization Forms,” Unicode Standard Annex 15, 09 2009. |
[W3C.REC-html401-19991224] | Hors, A., Raggett, D., and I. Jacobs, “HTML 4.01 Specification,” World Wide Web Consortium Recommendation REC-html401-19991224, December 1999 (HTML). |
[zoneinfo] | Public Domain, “The tz database,” June 2011. |
TOC |
[OpenID.2.0] | OpenID Foundation, “OpenID Authentication 2.0,” December 2007 (TXT, HTML). |
[OpenID.Basic] | Sakimura, N., Bradley, J., Jones, M., de Medeiros, B., and C. Mortimore, “OpenID Connect Basic Client Profile 1.0,” July 2013. |
[OpenID.Implicit] | Sakimura, N., Bradley, J., Jones, M., de Medeiros, B., Mortimore, C., and E. Jay, “OpenID Connect Implicit Client Profile 1.0,” July 2013. |
[OpenID.PAPE] | Recordon, D., Jones, M., Bufu, J., Ed., Daugherty, J., Ed., and N. Sakimura, “OpenID Provider Authentication Policy Extension 1.0,” December 2008 (TXT, HTML). |
[OpenID.Session] | Sakimura, N., Bradley, J., Jones, M., de Medeiros, B., Mortimore, C., and E. Jay, “OpenID Connect Session Management 1.0,” July 2013. |
[RFC4949] | Shirey, R., “Internet Security Glossary, Version 2,” RFC 4949, August 2007 (TXT). |
[X.1252] | International Telecommunication Union, “ITU-T Recommendation X.1252 -- Cyberspace security -- Identity management -- Baseline identity management terms and definitions,” ITU-T X.1252, November 2010. |
TOC |
The following are non-normative examples of Authorization Requests with differing response_type values and their responses (with line wraps within values for display purposes only):
TOC |
GET /authorize? response_type=code &client_id=s6BhdRkqt3 &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb &scope=openid%20profile%20email &nonce=n-0S6_WzA2Mj &state=af0ifjsldkj HTTP/1.1 Host: server.example.com HTTP/1.1 302 Found Location: https://client.example.org/cb? code=Qcb0Orv1zh30vL1MPRsbm-diHiMwcLyZvn1arpZv-Jxf_11jnpEX3Tgfvk &state=af0ifjsldkj
TOC |
GET /authorize? response_type=id_token &client_id=s6BhdRkqt3 &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb &scope=openid%20profile%20email &nonce=n-0S6_WzA2Mj &state=af0ifjsldkj HTTP/1.1 Host: server.example.com HTTP/1.1 302 Found Location: https://client.example.org/cb# id_token=eyJhbGciOiJSUzI1NiJ9.ew0KICJpc3MiOiAiaHR0cDovL3Nlc nZlci5leGFtcGxlLmNvbSIsDQogInN1YiI6ICIyNDgyODk3NjEwMDEiLA0KI CJhdWQiOiAiczZCaGRSa3F0MyIsDQogIm5vbmNlIjogIm4tMFM2X1d6QTJNa iIsDQogImV4cCI6IDEzMTEyODE5NzAsDQogImlhdCI6IDEzMTEyODA5NzAsD QogIm5hbWUiOiAiSmFuZSBEb2UiLA0KICJnaXZlbl9uYW1lIjogIkphbmUiL A0KICJmYW1pbHlfbmFtZSI6ICJEb2UiLA0KICJnZW5kZXIiOiAiZmVtYWxlI iwNCiAiYmlydGhkYXRlIjogIjAwMDAtMTAtMzEiLA0KICJlbWFpbCI6ICJqY W5lZG9lQGV4YW1wbGUuY29tIiwNCiAicGljdHVyZSI6ICJodHRwOi8vZXhhb XBsZS5jb20vamFuZWRvZS9tZS5qcGciDQp9.Bgdr1pzosIrnnnpIekmJ7ooe DbXuA2AkwfMf90Po2TrMcl3NQzUE_9dcr9r8VOuk4jZxNpV5kCu0RwqqF11- 6pQ2KQx_ys2i0arLikdResxvJlZzSm_UG6-21s97IaXC97vbnTCcpAkokSe8 Uik6f8-U61zVmCBMJnpvnxEJllfV8fYldo8lWCqlOngScEbFQUh4fzRsH8O3 Znr20UZib4V4mGZqYPtPDVGTeu8xkty1t0aK-wEhbm6Hi-TQTi4kltJlw47M cSVgF_8SswaGcW6Bf_954ir_ddi4Nexo9RBiWu4n3JMNcQvZU5xMPhu-EF-6 _nJNotp-lbnBUyxTSg &state=af0ifjsldkj
Verifying and decoding the ID Token will yield the following Claims:
{ "iss": "http://server.example.com", "sub": "248289761001", "aud": "s6BhdRkqt3", "nonce": "n-0S6_WzA2Mj", "exp": 1311281970, "iat": 1311280970, "name": "Jane Doe", "given_name": "Jane", "family_name": "Doe", "gender": "female", "birthdate": "0000-10-31", "email": "janedoe@example.com", "picture": "http://example.com/janedoe/me.jpg" }
TOC |
GET /authorize? response_type=id_token%20token &client_id=s6BhdRkqt3 &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb &scope=openid%20profile%20email &nonce=n-0S6_WzA2Mj &state=af0ifjsldkj HTTP/1.1 Host: server.example.com HTTP/1.1 302 Found Location: https://client.example.org/cb# access_token=jHkWEdUXMU1BwAsC4vtUsZwnNvTIxEl0z9K3vx5KF0Y &token_type=Bearer &id_token=eyJhbGciOiJSUzI1NiJ9.ew0KICJpc3MiOiAiaHR0cDovL3NlcnZlc i5leGFtcGxlLmNvbSIsDQogInN1YiI6ICIyNDgyODk3NjEwMDEiLA0KICJhdWQiO iAiczZCaGRSa3F0MyIsDQogIm5vbmNlIjogIm4tMFM2X1d6QTJNaiIsDQogImV4c CI6IDEzMTEyODE5NzAsDQogImlhdCI6IDEzMTEyODA5NzAsDQogImF0X2hhc2giO iAiNzdRbVVQdGpQZnpXdEYyQW5wSzlSUSINCn0.g7UR4IDBNIjoPFV8exQCosUNV eh8bNUTeL4wdQp-2WXIWnly0_4ZK0sh4A4uddfenzo4Cjh4wuPPrSw6lMeujYbGy zKspJrRYL3iiYWc2VQcl8RKdHPz_G-7yf5enut1YE8v7PhKucPJCRRoobMjqD73f 1nJNwQ9KBrfh21Ggbx1p8hNqQeeLLXb9b63JD84hVOXwyHmmcVgvZskge-wExwnh Ivv_cxTzxIXsSxcYlh3d9hnu0wdxPZOGjT0_nNZJxvdIwDD4cAT_LE5Ae447qB90 ZF89Nmb0Oj2b1GdGVQEIr8-FXrHlyD827f0N_hLYPdZ73YK6p10qY9oRtMimg &state=af0ifjsldkj
Verifying and decoding the ID Token will yield the following Claims:
{ "iss": "http://server.example.com", "sub": "248289761001", "aud": "s6BhdRkqt3", "nonce": "n-0S6_WzA2Mj", "exp": 1311281970, "iat": 1311280970, "at_hash": "77QmUPtjPfzWtF2AnpK9RQ" }
TOC |
GET /authorize? response_type=code%20id_token &client_id=s6BhdRkqt3 &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb &scope=openid%20profile%20email &nonce=n-0S6_WzA2Mj &state=af0ifjsldkj HTTP/1.1 Host: server.example.com HTTP/1.1 302 Found Location: https://client.example.org/cb# code=Qcb0Orv1zh30vL1MPRsbm-diHiMwcLyZvn1arpZv-Jxf_11jnpEX3Tgfvk &id_token=eyJhbGciOiJSUzI1NiJ9.ew0KICJpc3MiOiAiaHR0cDovL3NlcnZlc i5leGFtcGxlLmNvbSIsDQogInN1YiI6ICIyNDgyODk3NjEwMDEiLA0KICJhdWQiO iAiczZCaGRSa3F0MyIsDQogIm5vbmNlIjogIm4tMFM2X1d6QTJNaiIsDQogImV4c CI6IDEzMTEyODE5NzAsDQogImlhdCI6IDEzMTEyODA5NzAsDQogImNfaGFzaCI6I CJMRGt0S2RvUWFrM1BrMGNuWHhDbHRBIg0KfQ.dAVXerlNOJ_tqMUysD_k1Q_bRX RJbLkTOsCPVxpKUis5V6xMRvtjfRg8gUfPuAMYrKQMEqZZmL87Hxkv6cFKavb4ft BUrY2qUnrvqe_bNjVEz89QSdxGmdFwSTgFVGWkDf5dV5eIiRxXfIkmlgCltPNocR AyvdNrsWC661rHz5F9MzBho2vgi5epUa_KAl6tK4ksgl68pjZqlBqsWfTbGEsWQX Efu664dJkdXMLEnsPUeQQLjMhLH7qpZk2ry0nRx0sS1mRwOM_Q0Xmps0vOkNn284 pMUpmWEAjqklWITgtVYXOzF4ilbmZK6ONpFyKCpnSkAYtTEuqz-m7MoLCD_A &state=af0ifjsldkj
Verifying and decoding the ID Token will yield the following Claims:
{ "iss": "http://server.example.com", "sub": "248289761001", "aud": "s6BhdRkqt3", "nonce": "n-0S6_WzA2Mj", "exp": 1311281970, "iat": 1311280970, "c_hash": "LDktKdoQak3Pk0cnXxCltA" }
TOC |
GET /authorize? response_type=code%20token &client_id=s6BhdRkqt3 &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb &scope=openid%20profile%20email &nonce=n-0S6_WzA2Mj &state=af0ifjsldkj HTTP/1.1 Host: server.example.com HTTP/1.1 302 Found Location: https://client.example.org/cb# code=Qcb0Orv1zh30vL1MPRsbm-diHiMwcLyZvn1arpZv-Jxf_11jnpEX3Tgfvk &access_token=jHkWEdUXMU1BwAsC4vtUsZwnNvTIxEl0z9K3vx5KF0Y &token_type=Bearer &state=af0ifjsldkj
TOC |
GET /authorize? response_type=code%20id_token%20token &client_id=s6BhdRkqt3 &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb &scope=openid%20profile%20email &nonce=n-0S6_WzA2Mj &state=af0ifjsldkj HTTP/1.1 Host: server.example.com HTTP/1.1 302 Found Location: https://client.example.org/cb# code=Qcb0Orv1zh30vL1MPRsbm-diHiMwcLyZvn1arpZv-Jxf_11jnpEX3Tgfvk &access_token=jHkWEdUXMU1BwAsC4vtUsZwnNvTIxEl0z9K3vx5KF0Y &token_type=Bearer &id_token=eyJhbGciOiJSUzI1NiJ9.ew0KICJpc3MiOiAiaHR0cDovL3NlcnZlc i5leGFtcGxlLmNvbSIsDQogInN1YiI6ICIyNDgyODk3NjEwMDEiLA0KICJhdWQiO iAiczZCaGRSa3F0MyIsDQogIm5vbmNlIjogIm4tMFM2X1d6QTJNaiIsDQogImV4c CI6IDEzMTEyODE5NzAsDQogImlhdCI6IDEzMTEyODA5NzAsDQogImF0X2hhc2giO iAiNzdRbVVQdGpQZnpXdEYyQW5wSzlSUSIsDQogImNfaGFzaCI6ICJMRGt0S2RvU WFrM1BrMGNuWHhDbHRBIg0KfQ.JQthrBsOirujair9aD5gj1Yd5qEv0j4fhLgl8h 3RaH3soYhwPOiN2Iy_yb7wMCO6I3bPoGJc3zCkpjgUtdB4O2eEhFqXHdwnE4c0oV TaTHJi_PdV2ox9g-1ikDB0ckWk0f0SzBd7yM2RoYYxJCiGBQlsSSRQz6ehykonI3 hLAhXFdpfbK-3_a3HBNKOv_9Mr_JJrz2pqSygk5IBNvwzf1ouVeM91KKvr7EdriK N8ysk68fctbFAga1p8rE3cfBOX7Acn4p9QSNpUx0i_x4WHktyKDvH_hLdUw91Fql _UOgMP_9h8TYdkAjcq8n1tFzaO7kVaazlZ5SM32J7OSDgNSA &state=af0ifjsldkj
Verifying and decoding the ID Token will yield the following Claims:
{ "iss": "http://server.example.com", "sub": "248289761001", "aud": "s6BhdRkqt3", "nonce": "n-0S6_WzA2Mj", "exp": 1311281970, "iat": 1311280970, "at_hash": "77QmUPtjPfzWtF2AnpK9RQ", "c_hash": "LDktKdoQak3Pk0cnXxCltA" }
TOC |
The following is the RSA public key in JWK format that can be used to validate the ID Token signatures in the above examples (with line wraps within values for display purposes only):
{ "kty":"RSA", "n":"zhEWTBJVTfcUeqnMzOQFMCEVQWOyOUZwP8LrBWh88tKrZyPGCvBkTDp-E2Bzy HMQV4pK51Uys2YOwzL9se5THDWMda9rtsCJVcj1V7WaE7wPgl-kIIdWWf4o2g 6ZszOy_Fp4q0nG3OTtDRCkBu2iEP21j82pRSRrkCBxnzaChflA7KZbI1n_yhK txyA7FdA480LaSVZyKApvrKiYhocACSwf0y6CQ-wkEi6mVXRJt1aBSywlLYA0 8ojp5hkZQ39eCM2k1EdXdhbar998Q9PZTwXA1cfvuGTZbDWxEKLjMKVuKrT1Y vs-2NTXhZAW1KjFS_3UwLkDk-w4dVN-x5tDnw", "e":"AQAB" }
TOC |
As a successor version of OpenID, this specification heavily relies on ideas explored in OpenID Authentication 2.0 (OpenID Foundation, “OpenID Authentication 2.0,” December 2007.) [OpenID.2.0]. Please refer to Appendix C of OpenID Authentication 2.0 for the full list of the contributors for that specification.
In addition, the OpenID Community would like to thank the following people for the work they have done in the drafting and editing of this specification.
Naveen Agarwal (naa@google.com), Google
Amanda Anganes (aanganes@mitre.org), Mitre
Casper Biering (cb@peercraft.com), Peercraft
John Bradley (ve7jtb@ve7jtb.com), Ping Identity
Tim Bray (tbray@textuality.com), Google
Johnny Bufu (jbufu@janrain.com), Janrain
Brian Campbell (bcampbell@pingidentity.com), Ping Identity
Blaine Cook (romeda@gmail.com), Independent
Breno de Medeiros (breno@gmail.com), Google
Pamela Dingle (pdingle@pingidentity.com), Ping Identity
Vladimir Dzhuvinov (vladimir@nimbusds.com), Nimbus Directory Services
George Fletcher (george.fletcher@corp.aol.com), AOL
Roland Hedberg (roland.hedberg@adm.umu.se), University of Umea
Ryo Ito (ryo.ito@mixi.co.jp), mixi, Inc.
Edmund Jay (ejay@mgi1.com), Illumila
Michael B. Jones (mbj@microsoft.com), Microsoft
Torsten Lodderstedt (t.lodderstedt@telekom.de), Deutsche Telekom
Nov Matake (nov@matake.jp), Independent
Chuck Mortimore (cmortimore@salesforce.com), Salesforce
Anthony Nadalin (tonynad@microsoft.com), Microsoft
Hideki Nara (hdknr@ic-tact.co.jp), Tact Communications
Axel Nennker (axel.nennker@telekom.de), Deutsche Telekom
David Recordon (dr@fb.com), Facebook
Justin Richer (jricher@mitre.org), Mitre
Nat Sakimura (n-sakimura@nri.co.jp), Nomura Research Institute, Ltd.
Luke Shepard (lshepard@fb.com), Facebook
Andreas Akre Solberg (andreas.solberg@uninett.no), UNINET
Paul Tarjan (pt@fb.com), Facebook
TOC |
Copyright (c) 2013 The OpenID Foundation.
The OpenID Foundation (OIDF) grants to any Contributor, developer, implementer, or other interested party a non-exclusive, royalty free, worldwide copyright license to reproduce, prepare derivative works from, distribute, perform and display, this Implementers Draft or Final Specification solely for the purposes of (i) developing specifications, and (ii) implementing Implementers Drafts and Final Specifications based on such documents, provided that attribution be made to the OIDF as the source of the material, but that such attribution does not indicate an endorsement by the OIDF.
The technology described in this specification was made available from contributions from various sources, including members of the OpenID Foundation and others. Although the OpenID Foundation has taken steps to help ensure that the technology is available for distribution, it takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use of the technology described in this specification or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any independent effort to identify any such rights. The OpenID Foundation and the contributors to this specification make no (and hereby expressly disclaim any) warranties (express, implied, or otherwise), including implied warranties of merchantability, non-infringement, fitness for a particular purpose, or title, related to this specification, and the entire risk as to implementing this specification is assumed by the implementer. The OpenID Intellectual Property Rights policy requires contributors to offer a patent promise not to assert certain patent claims against other contributors and against implementers. The OpenID Foundation invites any interested party to bring to its attention any copyrights, patents, patent applications, or other proprietary rights that may cover technology that may be required to practice this specification.
TOC |
[[ To be removed from the final specification ]]
-13
-12
TOC |
Nat Sakimura | |
Nomura Research Institute, Ltd. | |
Email: | n-sakimura@nri.co.jp |
John Bradley | |
Ping Identity | |
Email: | ve7jtb@ve7jtb.com |
Michael B. Jones | |
Microsoft | |
Email: | mbj@microsoft.com |
Breno de Medeiros | |
Email: | breno@google.com |
Chuck Mortimore | |
Salesforce | |
Email: | cmortimore@salesforce.com |